Separate names with a comma.
RCD offers some variations.
You are only talking about .063 over or .0315 per side.
A couple more candidates.
If you want to call it something other than a pump sizer call it a low speed. Pressure to be set above your idle pressure so it comes on quick....
Did you melt it down?
I don't think gas ports were mentioned by the OP.
However if one is inclined to tinker have you seen the Total Seal ring with some "gas port"...
just curious. How do you know it's off?
Porting pistons just sounds wrong. Modifying, shaping and getting rid of sharp edges to improve the flow path is normal in many corners, boosted...
You are likely on a safe tune. 20% will require no changes in your tune. Depending on your setup it might be a bit aggressive at the hit. Some...
It was the end of the season and some stink and thunder was deemed the order of the day.
FED injected alky w 4 stages n2o/alky. Ran 20% without...
I have a customer that wants me to machine and install some hoops.
Machining is no problem.
Who makes hoops that I can buy.
OK, I didn't catch that this is really an MFI using disabled EFI injectors.
Wonder what the final nozzle size becomes?
To get pressure at low rpm...
It is because he does not have enough pump to get 45 psi at idle. Bigger pumps than needed used by EFI guys means more volume per revolution,...
I think you answered your own question. The EFI injectors expect to see that 45 lbs or whatever at ALL rpms do they not?
ehhh. I am not comprehending why you would not consult your friend that you bought it from on these matters. Seems to me he must have gotten it...
I know what puller would work but seems like an unnecessary expense. I like hydrotherapy's idea.
Rewarm it up first to soften the loctite.
Just to be clear are you talking about the pulley or the hub that the pulley mounts on?
New starter may help but unlikely.
Yeah, the 20 needs some rpm.
Actually mfi and mags in general love rpm.
Consider 24V to the starter armature....
I CNC some buzzard spacers from time to time.
2 inches tall. Just stack them. Call if it is of interest.
Pictures are not high resolution but are those holes something that was previously welded/fixed?
I thought you were describing pistons hitting...