Top Alcohol Funny Car 2 step switch

Discussion in 'PSI Superchargers Tech Questions' started by Rick Stockman, Jan 22, 2023.

  1. Rick Stockman

    Rick Stockman New Member

    Joined:
    Jan 22, 2023
    Messages:
    2
    Likes Received:
    0
    Hello, Newbie here on your site I have search and read a lot and apreciate what I have learned here and someday will be able to pass something on to others, My question today, I want to mount a 2 step switch and I am open to suggestions on mounting and switch brand, I have a trick titanium bell and my first thought is to have a mount installed on it and run a lever type switch on the clutch lever. any help is greatly appreciated.
     
    #1
  2. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    That should work but we ran one with it welded to the roll cage and used a barrel valve linkage to fine tune it for when we wanted it to turn off. Launch rpm , clutch weight, pedal stop always changes so it's easier than loosening up that arm set screw.
     
    #2
  3. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    I think you will find the clutch switch is the best. You want the switch or the switch contact so you can adjust it as to when it is going to release in reference to when the clutch is going to engage.
     
    #3
  4. Marc White

    Marc White Member

    Joined:
    Nov 21, 2005
    Messages:
    204
    Likes Received:
    8
    Ck with Bohr racing products. They have a bell housing mounted switch setup.
     

    Attached Files:

    #4
    backmotor likes this.
  5. Rick Stockman

    Rick Stockman New Member

    Joined:
    Jan 22, 2023
    Messages:
    2
    Likes Received:
    0
    Thank you for the help in getting me down the correct path.
     
    #5

Share This Page