pump saver blocked off

Discussion in 'PSI Superchargers Tech Questions' started by blownapex, Mar 26, 2016.

  1. blownapex

    blownapex Member

    Joined:
    May 25, 2006
    Messages:
    507
    Likes Received:
    4
    I see a lot of px cars with the pump saver blocked off
    is this safe and ok to do this
    im thinking about blocking it off to save 1 hose being ran to return
    my fuel pressure now letting off spikes to 400 psi
    I also seen 1 with no fuel shut off but im not doing that
    thanks
    duane rister
     
    #1
    blownapex, Mar 26, 2016
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    If it is a Rage or Waterman pump then it is safe. I would not block it off on a Enderle. Ours is blocked off and has been for a long time with no problems
     
    #2
    Mike Canter, Mar 26, 2016
  3. Chuxluv

    Chuxluv Member

    Joined:
    Jul 9, 2003
    Messages:
    67
    Likes Received:
    0
    I run Enderle and mine is into the hat distribution block. Is this OK ? How much should pressure be set at?
     
    #3
    Chuxluv, Apr 7, 2016
  4. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Yes running that way is ok. The best way to set it is to see what you max fuel pressure is during the run and set it above that. 175 psi is normally a good point
     
    #4
    Mike Canter, Apr 8, 2016

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM