Hemi shortblocks,promod parts,shocks,etc

Discussion in 'Noonan Classifieds' started by badfast, Nov 27, 2015.

  1. badfast

    badfast Member

    Joined:
    Apr 3, 2008
    Messages:
    95
    Likes Received:
    2
    2 pair of BRAD 5 cylinder heads complete with victory valves,PAC springs, studs and O-rings. Single plug heads on both sets. $3000.00 a pair

    1 BRAD .100 tall intake manifold for screw blower. Never been welded on. Very nice shape. No nozzles or burst panels. $1000.00

    1 set Red stand rocker arms. Stage 5 intake rockers. Manton adjusters 5/16 ball. Very good shape ready to go. $2500.00

    KB stage 10 .100 tall 4.375 x 4.375 bore stroke no saddles been windowed but repaired and run
    Bryant crankshaft dual keyway
    GRP rods
    Bullet camshaft
    Arias pistons
    Gear drive
    $8,500 each. I have 2 for sale. please call and I can give you specifics on each. I can sell a complete longblock with the above parts ready to go right now for $15,000.00.

    Santhuff shocks 7 runs since rebuilt. I have the dyno sheets. come with 110lbs springs SOLD
    Koni shocks rebuilt at Strange.Not run since $500.00

    Floater housing built by Tim Mcamis for a Wally Stroupe chassis.
    17" bracket centerline 35.5" overall width
    Bolt pattern is 5x5.5
    Strange steel brakes
    40 spline solid axles with a new spare set as well
    Comes with 4 link bars and wishbone $3500.00

    ACD autoshift for 3 speed lenco $300.00 like new

    Computech Data Pro-45 computer. Has driveshaft,g meter,2 pressure and EGT $750.00

    PSI large opening magnesium hat for screwblower with davenport billet spacer. SOLD

    Neal Chance weld together converter for Brad hemi/14-71/powerglide combination NEW never run $750.00

    RCD mini snout for screw blower SOLD

    Meziere starter and billet steel flexplate for hemi. Bought new and never ran. $600.00

    Call for details cell 515-571-6660 Neal Hinman
     
    #1
    Last edited: Dec 16, 2015
  2. Vxssgen111

    Vxssgen111 Member

    Joined:
    Jan 8, 2012
    Messages:
    124
    Likes Received:
    1
    #2
  3. lucky devil

    lucky devil Member

    Joined:
    Apr 14, 2008
    Messages:
    283
    Likes Received:
    11
    #3
  4. badfast

    badfast Member

    Joined:
    Apr 3, 2008
    Messages:
    95
    Likes Received:
    2
    Hat and mini drive are sold. Luck devil check your pm.
     
    #4
  5. 1320metalman

    1320metalman Member

    Joined:
    Feb 26, 2015
    Messages:
    39
    Likes Received:
    5
    hello
    where do the parts ship from
    (city/state) ?
    (or local pickup only?)
    and at what cost to ship the 17" rearend/axles, to SW missouri? Springfield area.
    thanks.
    D.
     
    #5
  6. badfast

    badfast Member

    Joined:
    Apr 3, 2008
    Messages:
    95
    Likes Received:
    2
    They will ship from Webster city Iowa. I can get a quote via truck or I could meet u in Columbia,mo.
     
    #6
  7. 1320metalman

    1320metalman Member

    Joined:
    Feb 26, 2015
    Messages:
    39
    Likes Received:
    5
    OK. Thankyou for reply.
    Your 4 link width is 3 inches narrower than ours. (We can fabricate)
    We would have to surgically remove our chassis brackets & relocate narrower 3", And buy/trade for new wheels with 5.5 BS...instead of smaller which we own.
    Your wheel width is correct, but would not matter if we had to buy new beadlocs & change offset.
    (our window of clearance is bout .250" . Tight do to old car an need 34.5" tires. to fit)
    Still interested do to location as we can do exchange in person, as I've been burned, an need a floater for an OLD, low value car.

    Any room to negotiate on pricing privately? If so,
    Can we Call or text to my cell @ 417-655-4518.
    If not..no harm and thank you for your time.
    D.
     
    #7
  8. badfast

    badfast Member

    Joined:
    Apr 3, 2008
    Messages:
    95
    Likes Received:
    2
    The floater is sold. Thanks
     
    #8
  9. NZpromod1968

    NZpromod1968 New Member

    Joined:
    May 19, 2013
    Messages:
    22
    Likes Received:
    0
    hi any chance of some photos?
    jodznigel@gmail.com

    Floater housing built by Tim Mcamis for a Wally Stroupe chassis.
    17" bracket centerline 35.5" overall width
    Bolt pattern is 5x5.5
    Strange steel brakes
    40 spline solid axles with a new spare set as well
    Comes with 4 link bars and wishbone $3500.00

    Call for details cell 515-571-6660 Neal Hinman[/QUOTE]
     
    #9
  10. badfast

    badfast Member

    Joined:
    Apr 3, 2008
    Messages:
    95
    Likes Received:
    2
    Bump to the top
     
    #10

Share This Page