Separate names with a comma.
There are two ways to tune a motor on nitro: 1. Tune it like methanol where you are looking for plug color and you tune with an AFR in mind....
I've heard that "Chevron Synthetic All-weather THF" is even better than the John Deere fluid, is orange so you can see it and costs less. A 5...
The Hilborn -4 has the same size gear as an Enderle 1100. They usually make a little more than 17 GPM @ 4000 pump RPM @ 100 PSI. They aren't...
Methanol specific gravity: .801 @ 50F .796 @ 60F .792 @ 68F .791 @ 70F .786 @ 80F Here's a methanol/nitro chart you might find useful:...
RBS Superchargers sent one of the -8 in-line screen filters to test a while back. I was testing a system with a 990 pump at the time and put...
If the belt and pulleys have rounded teeth, it's a Dunn. If they have regular trapezoidal teeth, it's an Enderle. I've rebuilt a few of each and...
The calculator on the FIE site that Eli refers to is based on actual data collected here over the last 6 years. I go back and figure the Cv for...
Since it starts out full and ends up full, it doesn't change the level in the tranny. The connectors close up when you unplug them, so the unit...
Yup, it works. I've been doing that for a while with a unit I built years ago. Photo:...
My prices are the same as if you ordered direct from ETC. If you ask Hank for the "FIE Upgrade", you'll get charged an extra $13 for the...
Ok Mike, I give up. I've given several clear examples of how things completely unrelated to air cause the fuel requirements of the motor to...
Uh oh, it looks like we're not in agreement after all :) That's 3.2 - 5.0 for supercharged stuff. And that's just in my experience so far....
