waterman 800, 850

Discussion in 'PSI Superchargers Tech Questions' started by rickey, Jul 10, 2013.

  1. rickey

    rickey Member

    Joined:
    Dec 7, 2004
    Messages:
    262
    Likes Received:
    1
    would you tell me approximate flow at 9000 rpm for either of these gear sets
     
    #1
    rickey, Jul 10, 2013
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Can't give you 9000 but have the data for 8000.

    800 pump flows
    5000 - 11.0
    6000 - 13.2
    8000 - 17.4


    900 pump flows
    6000 - 14.6
    8000 - 19.4

    As far as I know Waterman don't make a single 850 for alcohol. Those flows are pretty linear so you can compute it out for 9000. I am sitting at an airport just coming back from Sweden and my mind has cobwebs
     
    #2
    Mike Canter, Jul 10, 2013
  3. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    pumps

    Waterman makes a 850, they are pretty common. 850, 851, whatever it takes ...:cool:

    approximate flows are like saying I'm approximately 20% of the way between Orange, Texas and El Paso, Texas.
     
    #3
    Will Hanna, Jul 10, 2013
  4. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    My flows listed are from Waterman
     
    #4
    Mike Canter, Jul 10, 2013
  5. rickey

    rickey Member

    Joined:
    Dec 7, 2004
    Messages:
    262
    Likes Received:
    1
    thanks Mike

    looks like i was right on my thinking, 800 about 19gpm at 9000
    I saw a flow sheet online for one someone was selling on rjunk

    hope you had a good trip
     
    #5
    rickey, Jul 10, 2013
  6. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Thanks, I had a great trip. Flew to Copenhagen, then across the bridge to Sweden. Stayed at Adams house then we took the FC to Alastaro, Finland on the ferry for the FIA drag race. We were beat by the Leanders Brothers (Leanders clutch fame) in round 2 by .0018 seconds. What is amazing is that Jonnie Lindberg ran a 5.49 sec run. Jonnie has set the new European FC record. They call it TMFC over there, Top Methanol Funny Car. Steve Harkers old FC was also there which is owned and driven by Leif Andresson. He held the previous record of 5.55 seconds.
     
    #6
    Mike Canter, Jul 10, 2013
  7. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    It wouldn't be a bad idea to take that pump on RJ and have your guy flow it, there is usually a variance (can be substantial) in flowbenches. One of the biggest differences I've seen is variance in inlet temp, if your pump was flowed in December in Maine that's quite a difference from Kentucky in July. Some people don't monitor it/put it on the flow sheet, but those who do try to ensure it's a consistent number. On a 900 Waterman I have seen over 2G at 9000 rpm with a good variance in the inlet temp. Just food for thought, good luck.

    Brandon Booher
    NHRA TAD #323
    Torque MGMT. - Owner
     
    #7
    underby6, Jul 11, 2013
  8. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    flow

    my point was assuming a pump flows what it is supposed to is not wise.
     
    #8
    Will Hanna, Jul 11, 2013
  9. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Understand your point and it is valid, but I think it was a more of wanting to know the flow so to buy the correct size pump.
     
    #9
    Mike Canter, Jul 11, 2013
  10. david chesnutt

    david chesnutt sand rat

    Joined:
    Jan 29, 2008
    Messages:
    21
    Likes Received:
    0
    lol

    I'm in El Paso .Where is Orange Texas....lol
     
    #10
    david chesnutt, Jul 11, 2013

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM