Valve Springs

Discussion in 'PSI Superchargers Tech Questions' started by racer313g, Jan 29, 2008.

  1. racer313g

    racer313g New Member

    Joined:
    Mar 17, 2006
    Messages:
    30
    Likes Received:
    0
    What valve springs are people using for Veney 2.5 heads?
     
    #1
    racer313g, Jan 29, 2008
  2. lugnut

    lugnut Member

    Joined:
    Dec 3, 2006
    Messages:
    145
    Likes Received:
    0
    We used erson 049 springs.
     
    #2
    lugnut, Jan 29, 2008
  3. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Just a little info. Erson and Manley springs are made by the same company but Erson is a little cheaper.
     
    #3
    Mike Canter, Jan 29, 2008
  4. racer313g

    racer313g New Member

    Joined:
    Mar 17, 2006
    Messages:
    30
    Likes Received:
    0
    anyone have a p/n for the 049's? erson's website is down.
     
    #4
    racer313g, Jan 30, 2008
  5. Les Mellows

    Les Mellows New Member

    Joined:
    Jul 18, 2003
    Messages:
    319
    Likes Received:
    0
    PAC springs

    I would check PAC springs - the website is http://www.racingsprings.com
    and Ken Juszczyk from Mike Comella' team is a distributor . He will give you a great deal . call Him he is in Ohio.
     
    #5
    Les Mellows, Jan 30, 2008
  6. Dan Martin

    Dan Martin New Member

    Joined:
    Jan 9, 2006
    Messages:
    66
    Likes Received:
    0
    Les is right. Check out the Pac spring #1355. It may look mild being only a 1.500" dual spring, but once you try them you will never look back at any of those 049 or 050 triples. The Pacs withstand overrevving much better. One overev with the triples you can toss them all in the scrap bin. The pacs FAR outlast the old conventional triples, they hold their pressure alot longer. It is easy to get lazy checking your springs with the pacs.....
     
    #6
    Dan Martin, Jan 30, 2008
  7. noelmanton

    noelmanton Authorized Merchant

    Joined:
    Mar 13, 2007
    Messages:
    162
    Likes Received:
    1
    We stock all of the PAC small diameter valve springs. We also produce all of the necessary hardware that is required for the installation. Our experience with the PAC1355 and 1360 has been very good. Better valve train stability, increased spring life. Just a better valve spring. Call and we will send you a complete catalog. 951 674-2212
    Noel Manton
     
    #7
    Last edited: Jan 31, 2008
    noelmanton, Jan 31, 2008
  8. M gibbs

    M gibbs f/c matchracer

    Joined:
    Oct 14, 2007
    Messages:
    20
    Likes Received:
    0
    thanks noel !!!

    last year ,i bought your big springs, put'em in @ 450 like you said, best damm thing i've done for the valve train, DEAD ON!!! WORKS GREAT!!! YOUR THE BEST, Thanks again noel. if you like you can see in run just doin some match racing havin fun. listen too NOEL YOU'ALL www.lynchmobdragracing.com
     
    #8
    M gibbs, Feb 1, 2008
  9. Lonnie Houde

    Lonnie Houde Member

    Joined:
    Nov 14, 2005
    Messages:
    252
    Likes Received:
    0
    The PAC springs are badd ass!
     
    #9
    Lonnie Houde, Feb 1, 2008
  10. DQUES

    DQUES Member

    Joined:
    May 20, 2004
    Messages:
    650
    Likes Received:
    6
    Here is Ken Juszczyk's phone # for the Pac springs , 216-390-4561 . Ken is the east coast distributor .
     
    #10
    Last edited: Feb 1, 2008
    DQUES, Feb 1, 2008

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM