Used 6-71 Littlefield Alch/Nitro Mini Retro Std. Helix

On the shelf, can ship out today. Plenty of time for Christmas. Used Littlefield 6-71 polished alum. alch/nitro blower. This is a blower that is perfect for a hard running alch. or nitro engine. The rotors are stripped on the tops with nylatron and sides with Teflon that use Teflon retention screws so no staked up rotors. Blower uses a heat treated cast alum. case, cast rear bearing plate and front cover as well as a billet alum. mini-retro front bearing plate for superior strength and the most air volume going into the motor. The rotors are cast GM sixty degree that have had the lightning holes plugged for max boost into the engine and ride in precision hi speed bearings that are timed by steel gears. Top opening is 10.50" x 4.50" and mini-retro large pie bottom opening which will have to be set back on the blower manifold most likely for the blower to seal to the manifold. This blower has been drilled in the rear 1/8" pipe two spots for fuel nozzles and this blower will accept a Bug, Bird or most of todays Carbon Fiber injectors with a 13.250" on center bolt pattern. Blower has fresh strips and new seals and is ready to go racing. Front cover is set up for a pressure relief valve and includes studs to mount a blower belt guard. #7006-0041 $2,000.00. Click on the link for more pictures of the blower http://www.rbssuperchargers.com/zcaGo/zProductEdit?productID=8623.