tafc pistons

Discussion in 'PSI Superchargers Tech Questions' started by ogt, Sep 21, 2006.

  1. ogt

    ogt Member

    Joined:
    Aug 16, 2006
    Messages:
    95
    Likes Received:
    0
    Does any one know where 2 get 4.310 /4.500 stoke,2.500intake valve pistons fast? and not c@a,
     
    #1
    ogt, Sep 21, 2006
  2. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    arias..that is the same thing i run..310-532-9737..i have a set of low run used ones...1-620-249-5909 or 1-620-231-5688 work dave lowe
     
    #2
    secondwindracing, Sep 21, 2006
  3. Ron C

    Ron C Jr. Dragster

    Joined:
    Mar 4, 2005
    Messages:
    519
    Likes Received:
    1
    JE pistons has an expedited service for a fee.
     
    #3
    Ron C, Sep 21, 2006
  4. Alkydrag

    Alkydrag Sr. Dragster

    Joined:
    Dec 24, 2003
    Messages:
    351
    Likes Received:
    1
    Call JE and ask for Ed. They have a Newberry part number. I cant remember what it is, I no longer work for them. You can reach Ed at 714-898-9763 ext. 217. It may be for the small valve though.
     
    #4
    Alkydrag, Sep 21, 2006
  5. Bob Kraemer

    Bob Kraemer New Member

    Joined:
    Feb 24, 2004
    Messages:
    422
    Likes Received:
    1
    Bill Ancona, Holbrook or Robert Reehl may have what you are looking for.
     
    #5
    Bob Kraemer, Sep 22, 2006
  6. anvalca

    anvalca New Member

    Joined:
    Sep 22, 2006
    Messages:
    4
    Likes Received:
    0
    Call Ross Racing Pistons, they make Newberry's pistons 310 536-0100
     
    #6
    anvalca, Sep 22, 2006
  7. Alkydrag

    Alkydrag Sr. Dragster

    Joined:
    Dec 24, 2003
    Messages:
    351
    Likes Received:
    1
    Ross makes them for C&A. When C&A gets them from Ross, C&A or ROSS has machined out the ROSS logo that's forged into the piston. C&A doesn't make pistons.
     
    #7
    Alkydrag, Sep 22, 2006
  8. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5

    does this mean i can buy from Ross or C &A
    or only from Bob

    I need to get 10 for the 2.6"
     
    #8
    john348, Sep 23, 2006
  9. Alkydrag

    Alkydrag Sr. Dragster

    Joined:
    Dec 24, 2003
    Messages:
    351
    Likes Received:
    1
    Ross may tell you to call C&A.
     
    #9
    Alkydrag, Sep 23, 2006
  10. anvalca

    anvalca New Member

    Joined:
    Sep 22, 2006
    Messages:
    4
    Likes Received:
    0
    Call Pat at Ross he will take care of it for you 310 536-0100

    Tony: Ross does the milling.
     
    #10
    anvalca, Sep 24, 2006

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM