TAD question

Discussion in 'PSI Superchargers Tech Questions' started by JP, Oct 18, 2005.

  1. JP

    JP Member

    Joined:
    Oct 8, 2005
    Messages:
    229
    Likes Received:
    0
    What are your thoughts on the type of oil pan for a TAD.This is an Anderson Fat head 512 cuin screw blower deal bought out off a tafc . This engine has a dry sump oil pan and pump, But we can put an standard sump tank due to space. Also I plan to use a 1.82 first and 4.29 rears on a 34.5 hoosier tire. What do you guys think?

    Ps.
     
    #1
    JP, Oct 18, 2005
  2. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    jp,

    most tad's run a wet sump pan even with a dry sump pump.

    as far as your engine and gearing combo, i'd plan on taking a few advil before you run....that's going to shake your brains out if you're running it at 92 or higher overdrive. thats if it makes it far enough to shake without blowing the tires off. depending on the car, how much od and tracks you run at, may look at 1.56-1.68 range on that low gear.
     
    #2
    Will Hanna, Oct 18, 2005
  3. was R4K

    was R4K Member

    Joined:
    Jun 20, 2003
    Messages:
    512
    Likes Received:
    0
    could try a 4.10 rear gear with that much tranny gear- the math works- mid track performance may suffer. gonna pack a bunch of weight with that cu. in.
     
    #3
    was R4K, Oct 19, 2005

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM