super mag 10 questions

ok...im a msd guy that just bought a mallory " 10 " so im not really up on mallory. question is, how can you tell if it is a 10 or 11 or any other series. all i have seen is 1 through 5. there is also a brain box that goes with it about the size of a 7al2 box. could use any info on what i have. thanks...kipp

 

call Don Zig..he has been around mags forever
his number is 323-735-6216

 

mag 10

I think I read somewhere that they were their first stab at electronic control but discontinued I think

 

craig you are rite...dave

 

SM X has a unilite trigger with a shutter rotor. I have an electronic points box under development that will work with a super mag or external coil vertex. The box uses a crank trigger and an msd timing box, and lets you use a six shooter to retard the timing. No soft rev limiter yet but I'm working on it. It may also be possible to install a mag trigger in the magneto but I have not experimented with that yet. My unit will work with the SM X as is (not requiring the crank trigger). My guess is that the MSD pro mag unit will not work very well with the vertex because the internal windings of the vertex are very different electrically from the windings in the pro mag.

 

Thanks for that you have a PM....

 

mag

thanks for all the contact info. everyone is telling me the same. if it works now ,it wont for long...so i have a real nice conversation piece...lol

thanks again

 

good idea maybe more people should be trying to buy these units and use this new computer....