starter engine location help

hi all!
i am currently converting a blown injected alcohol wedge mopar engine to normally aspirated injected alcohol.
i have no room for an onboard starter in the chassis (funnycar/altered)on the side or the front of the engine.
i recently spotted a pic of an A/FUEL dragster engine that had a blower pulley and starter ring monted to the side of the engine,in front of the head,probably to the front motor plate.
could anybody tell me more about this setup?
are the top pulley and ring mounted to a blower snout that is bolted to the front plate?
does this setup use a hub and crank pulley or a damper and crank pulley?
thanks you for any infos.
cyril

 

crank my shaft

I have some good pictures of a a fuel setup on a Fontana like you described. give me a email address and Ill send u some pictures of it.dan

 

my e-mail:
willys413wedge@free.fr
the only pic i have is from a 1994 issue of DRAG RACING ILLUSTRATED,and it's a small one
thanks a lot!

 

pics

pictures sent. dan

 

NitroBandit......I would ALSO love to see a PIC of that!!! if you could send to tntmotorsports@prodigy.net....REALLY APPRECIATE it!!

 

no load

sorry, got kicked back to my email. I put them on my photobucket . heres the address http://s918.photobucket.com/user/nitrobandit1/library/hub?sort=3&page=1

 

thanks a lot Dan!
all the details are there!

 

Starter

Go to rcd and buy the starter brackets for a boat and mount the starter on the front of the crank.

 

thanks for the idea but i don't have room:my chassis has a 100 in wheelbase,and the fuel tank is in the way...

 

here is proof:
http://s967.photobucket.com/user/noiraude2/media/willyswork5_zps1e43bc53.jpg.html?sort=3&o=6