Smaller Intake Ports for Alcohol Hemi Heads

Just wanted to let everyone know about our new smaller Intake ports for the Alcohol Hemi heads. We set out to build a smaller, cross sectional port for the 422ci Injected Engines. We built them with the same area ideas that we built the Small and Big Block Chevy over the years for carburetorated cars. The smallest one turned out 16 ccs smaller than the standard ports that everyone has been used to for the last few years. In doing so, they only lost 2 to 3cfm of air at .700" + .800" lift, were the same at .500" + .600", and gained 5cfm at .400", and 8cfm at .300", same at .200". At the same time we found something that will help out the Blower Cars. All the ports have the same 2.425 valve size and the port openings have not changed. Your existing Intake Manifolds, along with all your valve train parts, covers, and pipes will fit. A couple of the teams have them but we do not have any feedback as of yet. A few guys have approached me about building something special, if anyone is interested in that kind of things, so are we. We are still doing repairs and port udates/tune-ups. Tell us how we can help.

Sincerely;
Steve Sanchez
Total Flow Products
248-588-4490
sales@totalflowproducts.com