SBC Raised runner blower manifolds

Is there anyone that makes these? I have a SBC with 14* Pro Action heads and seeing a whole lot of nothing on the market.
Someone has had to travel down this road before me.

 

I'm not a SBC expert, but I had a manifold made for standard AFR heads. Assuming that will not work on your application. I switched to HEMI years ago and have all the SBC still.

 

Also, have you called Jeff fowler? He ran blower SBC years ago.

 

I would imagine you will need to call up someone like Hogans to custom build an intake to work with those cylinder heads. Not to many people running them to have one already built ready to go. I had Hogans build me one for my canted valve Brodix SBC heads. It worked great cost around $3500

 

This is a fresh idea...in the early "google" stages. AFR did make a raised runner head but not sure if its comparable.

 

i had a blown SBC with the 14 pro action heads nothing is even close to fitting i built a sheet metal manifold for mine

 

manifold

I have manifold 9.300 deck - billet
p/m or give me a call

845-323-2469 Andy