Safety Transbreak device

Hello
What do you use to prevent Transbreak to be activatew during the run ? I thought using a RPM switch, under 2000 rpm the line lock can be operate, after 2000 RPM, no way...

Blown keith black w/ 3 speed Lencodrive

 

Could you wire up a relay that would latch and stay that way until the power is cycled ?

 

Moroso has a cool switch panel/controller that includes that function.

http://www.moroso.com/

 

The msd rpm switch does it, it power a wire all the time when the rpm is above a fixed chip. It come back to 0 when the rpm goes under.No need for a self powered relay. So I'm new to the blown alcohol racing but if you set the rpm swith chip just above idle it should work, you're never this low during the run.....

 

Some Dedenbear delay boxes have a timed lockout feature

 

Call Lenco

Lenco has one that works off the pod.