Rods

Discussion in 'PSI Superchargers Tech Questions' started by harrisracing, Jun 7, 2011.

  1. harrisracing

    harrisracing Member

    Joined:
    Nov 15, 2004
    Messages:
    116
    Likes Received:
    1
    We have run Brooks for years and since they are gone can you seasoned veterans recommend who we should switch to. 526KB 3/4 stg 8 alky fc Thanks Randy
     
    #1
  2. KEITH CLARK

    KEITH CLARK Member

    Joined:
    Oct 13, 2004
    Messages:
    300
    Likes Received:
    1
    We ran Brooks for years. Most of the staff at Brooks is at Venolia. They have a new rod that looks/weighs about the same as a B2, Venolia calls it V2. Just put a set in, only have 4 runs in NFC but every thing looks good.
     
    #2
  3. quick cut

    quick cut Member

    Joined:
    May 22, 2007
    Messages:
    106
    Likes Received:
    0
    Interested To see how they Go I used brooks as well.
    Now everyone tell us how the VENOLIA Rods are ?
    Dave
     
    #3
  4. Randy G.

    Randy G. Top Alcohol

    Joined:
    Jun 9, 2003
    Messages:
    1,902
    Likes Received:
    36
    BME. Strongest rod out there.
     
    #4
  5. ibaddlizzard@aol.com

    Joined:
    Jul 1, 2003
    Messages:
    199
    Likes Received:
    1
    we used the brooks as well when they closed there doors we switched to R+R billet rods took 2 lbs of rotating mass off the crank shaft almost all the ADRL guys use them and a lot of the alky guys as well. mike at R+R IS A HELL OF A GUY TO DEAL WITH TOO ........Doc
     
    #5
  6. clint thompson

    Joined:
    Jan 15, 2004
    Messages:
    633
    Likes Received:
    4
    Grp

    Hard to beat GRP in my opinion. I've run them for years and not had a failure. Great service, quick turn around. Good guys to deal with as well.
     
    #6
  7. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    I do not see how you can beat the MGP’s for quality or service
    I have had just about every rod ever made
    Don’t have to pay extra for the best bolts as that is all he uses
    No way can you beat the way Michael attaches the cap to the fork of the rod
    GRP comes close with the arc but in my opinion the full circle is the strongest “serrations”
    Bar none
    but again just my opinion
     
    #7
  8. blown375

    blown375 New Member

    Joined:
    Sep 9, 2005
    Messages:
    733
    Likes Received:
    0
    R&R makes a very good rod ! and great to deal with 2x !
     
    #8
    Last edited: Jun 12, 2011

Share This Page