Rocker Arm upgrades

Discussion in 'PSI Superchargers Tech Questions' started by JeffG, Dec 14, 2018.

  1. JeffG

    JeffG New Member

    Joined:
    Aug 20, 2016
    Messages:
    16
    Likes Received:
    0
    Putting together a new combo, 541" hemi fathead turbo setup. Have the BAE red stand rockers with the Stage V intake rockers that have the indirect pushrod oiling (not forced through pin). Exhaust are single rib, no pushrod oiling. I have searched plenty, and understand that there are better rockers to use. That being said, on a 9000rpm max setup, are my current rockers going to give me issues?
     
    #1
    JeffG, Dec 14, 2018
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    If you are in fact never going to go over 10,000 rpm then it is wide open. I thing the best out there is a toss up between Manton and Reid, you can’t go wrong with either. I prefer Manton
     
    #2
    Mike Canter, Dec 14, 2018
  3. AlcoholFan

    AlcoholFan Member

    Joined:
    Aug 13, 2003
    Messages:
    74
    Likes Received:
    2
    There are people out there that can update your rockers.Redrilled in jig and then stock oil hole welded closed. Someone might chime in on who does them.
     
    #3
    AlcoholFan, Dec 14, 2018
  4. kosky racing

    kosky racing Comp Eliminator

    Joined:
    May 11, 2003
    Messages:
    899
    Likes Received:
    49
    PSI -don't know if they still do
     
    #4
    kosky racing, Dec 15, 2018

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM