PSI cfm per rotation

Discussion in 'PSI Superchargers Tech Questions' started by sbguy, Sep 23, 2013.

  1. sbguy

    sbguy New Member

    Joined:
    Jan 20, 2011
    Messages:
    2
    Likes Received:
    0
    I'm hoping someone can help me with information about psi screw blowers.
    I'm after the cfm per revolution for each of the psi screws, hoping someone can help.
    I had the info and must have put it in a "safe place"
    Thank you for the space.
     
    #1
    sbguy, Sep 23, 2013
  2. Blown5402

    Blown5402 Member

    Joined:
    Aug 12, 2011
    Messages:
    586
    Likes Received:
    8
    Whipple Information

    That has been a some posts before on here and I think it was when someone asked about the Whipple 980 and someone gave the CFMs of all of the PSIs and some of the roots too-try searching for Whipple info on here-THANKS! Jim
     
    #2
    Blown5402, Sep 23, 2013
  3. scott hall

    scott hall Member

    Joined:
    Nov 15, 2004
    Messages:
    117
    Likes Received:
    4
    Patrick Hales "Nitro Tuner" gives you all that info!!!

    Support the ITA sponcers and you will get all your info...............

    My PSI "A" blower puts out 385 cu/in per rev......my engine is 388 cu/in......
     
    #3
    scott hall, Sep 23, 2013
  4. Patrick Hale

    Patrick Hale Member

    Joined:
    Aug 7, 2010
    Messages:
    59
    Likes Received:
    3
    #4
    Patrick Hale, Sep 23, 2013
  5. sbguy

    sbguy New Member

    Joined:
    Jan 20, 2011
    Messages:
    2
    Likes Received:
    0
    Thank you for the information Patrick, it's very much appreciated.
     
    #5
    sbguy, Sep 23, 2013

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM