Oberg Question

I am working on a car with an Oberg oil filter. It currently has inlet on one end and outlet on the other. There are 2 holes on each side I asume I can use any of them. I want to run both lines from the same side and before I mess something up I thought I'd ask
Thanks Kent

 

hi kent this is dave the guy that bought your wind struts and stays..you still have a wing? also who made the wing struts that i got from you..thanks dave lowe

 

Oberg filter

Only follow the stamped arrows for flow (in or Out). You can plumb it on either side or same side ,as long as you follow the arrow and the two lines will be one on each plate(half) .

The only thing to wath is the filter element , as it comes in many sizes( 2,10,30 microns) and using the wrong one will restrict flow. Hope this helps!

 

Thanks I did see that if you took it apart it would be two seperate halves and looked to me that it had two inlet ports (one on each end of that half) and two outlet ports ( one on each end of that half). But before I just asumed you could use any of the ports I thought I better check. Basically I want to put two fittings on one side next to one another and plug the two ports next to one another on the other side. What screen should be used for 60-70 wht oil?

 

oberg

check with oberg on the correct screen . I use to work on supermodified circle burners and saw a guy use an oberg filter on his oil system with a filter screen for alcohol ! Guess how well that worked trying to pump 50w oil thru it!