Nitro and Alcohol Racing Parts For Sale

A bunch of odds and ends to save you money .......

9.400 Trick Titanium 426 hemi bellhousing, with clutch pedal $2500

Bonifante 10.5 hemi titanium flywheel, six stand with 5/8 studs for 5 disc , great shape $1200

AFT 10.5 inch hemi 5 disc, 9 stand titanium clutch, in great condition $2500
Bonifante 10.5 inch hemi 5 disc, 9 stand titanium clutch, excellent shape $2500

Rob Moore 1-3/4 input shaft 13.250 inches long, new $500, used $100
Rob Moore 1 3/4 input shaft, 13 inches long, new $500
1 3/4 male rear coupler, new $100
1 3/4 5 inch driveshaft, used nice $150
1 3/4 collar stop $25

1 3/8 driveshaft coupler 16 spline, standard length used $25
1 3/8 driveshaft coupler 16 spline, extra long, used $25

1 1/2 male rear coupler, 32 spline, used $25
1 1/2 7.250 inch driveshaft, used $100

2 - MSD black coils for 44 amp mags $60 each

rear end filler cap (2) used $10 each
CO2 5lbs bottle with regulator, used $75
CO2 3/4lbs mounting brackets $15
3 - 9" Ford pinion nut, new $10 each
Christman 12 inch spool, used $300
Christman 12 inch front pinion support with female coupler $150
bell housing stud 3/4" $10 each
bellhousing cross shaft billet arm, used $20

13.9 aluminum pulleys, 26, 27, $50 each
13.9 aluminum pulley 41 $70
RCD 13.9 mag toothed idler pulley $100
upper blower pulley 1/4 inch spacer $20
Large blower burst panel kit (aluminum frames, panel, screws) like new $100
one run large burst panels $10
blower bag restraint pins (4) $15 each
3 stand blower starter bracket (2) used $75 each
ssi blower pressure relief valve, red $10
ssi blower studs, blue used $20 set

KB rear main seal holder #51454, used $20
Mr Gasket stock oil pump gasket #668 $2
hemi multi pattern exhaust gasket, heavy duty, new $25pr
Hemi main thrust bearing, upper and lower, new $10 each
hemi crank bolt with build in washer flange, used $15

3- TFX hemi H-11 head studs, 11 inches 1/2 to 9/16, used $25 each
1 - TFX hemi H-11 head stud, 9 inches, 1/2 to 9/16, used $25
1 - KB hemi head stud, 9.875 inches, 1/2 to 1/2, used $10
1 - KB hemi head stud, 10.625 inches, 9/16 to 9/16 used $10
2 - KB hemi head stud, 10.875 inches, 1/2 to 9/16, used $10 each
1 - KB hemi head stud, 11 inches, 9/16 to 9/16, used $10
1 - KB hemi head stud, 12.250 inches, 9/16 to 9/16, used $10
1 - Donovan 417 hemi head stud, 13.875, 9/16 to 9/16, used $10

NEW STILL IN EARL'S BAGS
7 - Earls part # 609094, -4 90 degree, S/S fitting, new $25 each
9 - Earls part # 609293, -3 90 degree, S/S fitting, new $20 each
2 - Earls part # 612193, -3 120 degree, S/S fitting, new $25 each
2 - Earls part # 612194, -4 120 degree, S/S fitting, new $25 each


hemi distributor shaft stabilizing collar $10

Rage 94 gpm fuel pump $1700
Enderle down nozzle fuel rails for AJ 1-5 heads $100 pr
XRP 100lbs pressure gauge, new $45
Hartman six stage fuel management system $600
locking hair pin $1
3/8" hex fuel pump shaft and coupler $10


2 - Hurst brake pads 4550050, new $70
Hurst brake pads 4550049, new $70
Hurst rear brake calibers 02-1372 (2 - used) $200
4 - Strange front brake caliper, billet aluminum, early style, used $50 each
Strange front caliper rebuildong kits, new $20
dual master cylinder mounting plate (2) $10 each
5 - Srange rear caliper mounting shims $20 all
JFZ front brake pads #005-1004, new $10
Wilwoods front brake pads #1251, new $15

Magnaflux Model L-10 Coil kit with black light kit $500


Deist 3 speed Lenco with reverser blanket, outdated sfi $40
Deist engine diaper straps (5) $10 each

Simpson Nitro Bandit 2 dark tint visor, new $25
Simpson nitro helmet fresh air valve, in helmet, new $25

old school bolt on funny car weight bar, used $50

SHIPPING EXTRA

Paul Weiss
call or text at 203-906-3084
funnycar121(at)aol.com

 

Thanks for looking

Paul