Misc Race Car Parts For Sale!

Lots of used and new parts sale / shop clean up!

Used and new T&D stuff.
instruction papers.
Used steel rocker arms, 1.75 Ratio x 1.650" x Straight, x 1.050" wide, w/ Needle brg tip roller 12pc in good condition. 1 are missing the axle and bearings, 3pc where the adjuster is messed up but probably fixable for the one that want to spend the time doing it.
Used steel rocker arms, 1.75 Ratio x 1.650" x .170” left offset, x 1.050" wide, w/ Needle brg tip roller 6pc in good condition, 2pc are missing axles, 2pc are missing axles and bearings.
Only have 3 used 7/16 thread adjusters screws that got 5/16 cup because I used Manton ball adjusters on them.
15 used 7/16 adjuster nuts.
18 new 7/16 adjuster nuts.
Some new rocker stand shims.
New T&D roller tip assembly 24pc rollers and 20pc axles and clips.
16 used stand to head bolts.
Used and new 5/16-18 x 1-1/8" Torx Rocker Shaft Bolt.
New and used rocker arm studs and nuts.
T&D / AJPE used rocker arm stands that got the exhaust stands welded on the intake stands, used these on my AJPE BBC billet heads, they are a bit messed up but fixable, I switched to Manton and therefore needed new stands.
All above $950, its easy around $3500 to buy new.

New Flatout Gasket Chevrolet bbc header gasket pn:7094C $40

Used Lenco CS1n 24 tooth 2” sun gear for a 1.17% gear set $50

New Lenco shifter bracket, give me a offer $??

Used rear Lenco intermediate shaft 1pc for 1.25% and are missing the bushing, 2pc for 1.31% and up one are missing the bushing $100 each

Used 2-speed Lenco Kevlar blanket like new but out of cert, can have it sent for free to Taylor for recert and the buyer pays for recert and shipping from Taylor to the new owner. $300

New Pro-werks C72-090 150lbs CO2 Short Nipple Regulator $65

New Bruno Drive 1” drum, got a magnet for input speed in it $150

Used Computech Race Air weather analyzer, like new, bought in 2018 used for 4 races only $350

Used red MSD pro mag 44 coil with rubbers have 16 passes since Electrimotion checked it in February 19 $350

Used red MSD 44 pro mag coil without rubbers have 0 passes since Electrimotion checked it in February 19 $350

Used MSD Wiring Harness For Points Box 44 Amp $30

New Air Retard RCD Three Jaw Driver $50

New MSD Points Box Vibration Mounts #8823 2pc $15 each

New MSD 44 Amp Coil Vibration Mounts #8822 2pc $30 each

Used MSD/Dunn Steel Mag Driver Cross #8107 $40

New Fuel Pump Clamp Quick Release Stainless Steel $35

Used black HD RCD Billet Mag Clamp $80

Used black light RCD Billet Mag Clamp $80

Used RCD Billet aluminum Mag Clamp $70

Used Stainless Steel Magneto Band Clamp $30

Used upper Mag Support clamp $40

New Manton Spark Plug Tube, Top Alcohol Head, Large Hole; OAL 8.250” $60 for all 4

New MSD Pro Mag Rotor #7920 5pc $20 each

Used MSD Pro Mag Rotor with new tip #7920 $10

New black MSD Pro Mag Cap Thumb Screw Small #8408 $35

New MSD Pro Mag red Cap & Rotor Kit #8119 $45

Used MSD Pro Mag Cap Adpt. #8120 3pc $40 each

Used MSD small pro mag cap base and small cap bottom with screws $80

Used MSD Pro Mag Spark Plug Wire/Cap Retainer #8121 and used black cap in ok condition 2pc $40 each

New Msd wire retainer give me a offer $??

Used home made MSD small Pro Mag Setup Tool $25

Used red MSD pro mag 44 points box with rev limiter have 16 passes since Electrimotion serviced it in February 19 $450

Used Msd Top Fuel tester pn:8993 little used in good condition $250

New MSD Pro Mag Noise Filter #8830 $40

Little used MSD Pro Mag Noise Filter #8830 $20

New MSD Pro Mag Rotor Large Terminal Kit #7411 $40

New MSD Pro Mag Timing Tape #8126 2pc $10 each

New MSD Wiring Harness, Pro-Billet, Crank Trigger Distributor to MSD -6 Box, 72 in. Long 2pc $12 each

New Magneto Kill Switch MSD SPST #8111 $50

Used MSD Synchronization Pickup Kit #7555 with spare optic cable included 2pc $70 each

Used Grant steering wheel $40

New RCD Mag Drive Hytrel Spyder Coupler Three Jaw $20

New Electrimotion extension cable 6ft long $60

Used 5 Series Manton pushrods 1/2 x .188 wall 5/16 – 5/16 ball with oiling 9.650” 2pc 8.832” 5pc 8.748” 1pc $100 for all 8.

Used 9pc and new 7pc 5 Series Manton pushrods 1/2 to 7/16 x .188 Wall 9.390” OAL Standard Cup Style Tip 3/8 CUP Upgrade to H-13 Tool Steel 3/8 BALL with oiling $240 for all 16.

Used 8pc and new 11pc 5 Series Manton pushrods 1/2 to 7/16 x .188 Wall 8.580” OAL Standard Cup Style Tip 3/8 CUP Upgrade to H-13 Tool Steel 3/8 BALL with oiling $285 for all 19.

Used RCD Offset Front Mag Drive with new spare 544-8M-12GT RCD Offset Mag Drive Belt and new RCD Mag Drive Hytrel Spyder Coupler Three Jaw $850

New US Gear Ring and Pinion # 07-910543. 35 spline, Ford 10" PRO Dual Bolt Pattern | 5.43 Ratio, MADE IN THE USA! $900


Or give me an offer on the parts.


Got pictures on everything, just ask and I will send to you!


Buyer pays for shipping!!!


Parts located in Sweden, I got a good deal on shipping with UPS, otherwise it will be Swedish way of USPS, next option is that you buy the parts and I will have parts sold shipped together to Indy and then ground to you from Indy, but still you will pay for the shipping, but it will be cheaper.


Email on andreas@abmracing.se or call / text on +4670-419-54-54


/Andreas

 

Parts list updated after parts been sold!


Used RCD Offset Front Mag Drive with new spare 544-8M-12GT RCD Offset Mag Drive Belt and new RCD Mag Drive Hytrel Spyder Coupler Three Jaw $850

New US Gear Ring and Pinion # 07-910543. 35 spline, Ford 10" PRO Dual Bolt Pattern | 5.43 Ratio, MADE IN THE USA! $900

New Flatout Gasket Chevrolet bbc header gasket pn:7094C $40

Used Lenco CS1n 24 tooth 2” sun gear for a 1.17% gear set $50

New Lenco shifter bracket, give me a offer $??

Used rear Lenco intermediate shaft 1pc for 1.25% and are missing the bushing, 2pc for 1.31% and up one are missing the bushing $100 each

New Pro-werks C72-090 150lbs CO2 Short Nipple Regulator $65

New Bruno Drive 1” drum, got a magnet for input speed in it $150

Used red MSD pro mag 44 coil with rubbers have 16 passes since Electrimotion checked it in February 19 $350

Used red MSD 44 pro mag coil without rubbers have 0 passes since Electrimotion checked it in February 19 $350

Used MSD Wiring Harness For Points Box 44 Amp $30

New Air Retard RCD Three Jaw Driver $50

Used MSD/Dunn Steel Mag Driver Cross #8107 $40

New Fuel Pump Clamp Quick Release Stainless Steel $35

Used black HD RCD Billet Mag Clamp $80

Used black light RCD Billet Mag Clamp $80

Used RCD Billet aluminum Mag Clamp $70

Used Stainless Steel Magneto Band Clamp $30

Used upper Mag Support clamp $40

New Manton Spark Plug Tube, Top Alcohol Head, Large Hole; OAL 8.250” $60 for all 4

New MSD Pro Mag Rotor #7920 5pc $20 each

Used MSD Pro Mag Rotor with new tip #7920 $10

New black MSD Pro Mag Cap Thumb Screw Small #8408 $35

New MSD Pro Mag red Cap & Rotor Kit #8119 $45

Used MSD Pro Mag Cap Adpt. #8120 3pc $40 each

Used MSD small pro mag cap base and small cap bottom with screws $80

Used MSD Pro Mag Spark Plug Wire/Cap Retainer #8121 and used black cap in ok condition 2pc $40 each

New Msd wire retainer give me a offer $??

Used home made MSD small Pro Mag Setup Tool $25

Used red MSD pro mag 44 points box with rev limiter have 16 passes since Electrimotion serviced it in February 19 $450

Used Msd Top Fuel tester pn:8993 little used in good condition $250

New MSD Pro Mag Noise Filter #8830 $40

Little used MSD Pro Mag Noise Filter #8830 $20

New MSD Pro Mag Rotor Large Terminal Kit #7411 $40

New MSD Pro Mag Timing Tape #8126 2pc $10 each

New MSD Wiring Harness, Pro-Billet, Crank Trigger Distributor to MSD -6 Box, 72 in. Long 2pc $12 each

New Magneto Kill Switch MSD SPST #8111 $50

Used MSD Synchronization Pickup Kit #7555 with spare optic cable included 2pc $70 each

Used Grant steering wheel $40

New RCD Mag Drive Hytrel Spyder Coupler Three Jaw $20

New Electrimotion extension cable 6ft long $60

Used 5 Series Manton pushrods 1/2 x .188 wall 5/16 – 5/16 ball with oiling 9.650” 2pc 8.832” 5pc 8.748” 1pc $100 for all 8.

Used 9pc and new 7pc 5 Series Manton pushrods 1/2 to 7/16 x .188 Wall 9.390” OAL Standard Cup Style Tip 3/8 CUP Upgrade to H-13 Tool Steel 3/8 BALL with oiling $240 for all 16.

Used 8pc and new 11pc 5 Series Manton pushrods 1/2 to 7/16 x .188 Wall 8.580” OAL Standard Cup Style Tip 3/8 CUP Upgrade to H-13 Tool Steel 3/8 BALL with oiling $285 for all 19.


Or give me an offer on the parts.


Got pictures of everything, just ask and I will send to you!


Buyer pays for shipping!!!


Parts located in Sweden, I got a good deal on shipping with UPS, otherwise it will be Swedish way of USPS, next option is that you buy the parts and I will have parts sold shipped together to Indy and then ground to you from Indy, but still you will pay for the shipping, but it will be cheaper.


Email on andreas@abmracing.se or call / text on +4670-419-54-54


/Andreas