MISC HEMI PARTS , RODS, CRANKS, CAM, PUSHRODS ETC.

1- new set of bill miller 426 hemi alum. rods, 7.126 long, 1.094 pin, 100ft. lb. bolts, paid $1400 asking $1000. Also have 3 used sets same specs as above 15 runs or less $200.00 set. Valesco 4.500 crank for hemi 2 3/4" mains , std. rods 2700 balance weight, double keyway. NO CRACKS #3/4 rod journal has some minor damage easy repair, less than 30 passes. $500.00. Bryant light weight crank for hemi, 4.15 stroke, 2 3/4" mains std. rods, double keyway. very low runs, has crack in rear main. Put in a non blown car and get years of use. $ B/O
New crane cams regrind 48deg 426 hemi 2".125 core size, R-296/500-16x48d. Have cam card no runs $450.00. 8 slightly used titanium intake valves dished, 11/32, 2.425x5.600, .250 tip $300.00 or bo. Nice set of crane lifters low runs #95542 1.900 spread bore $200.00. Crane .120 tall lifters $200.00 Pushrods as follows I have 11 manton @11.915, and 10 @ 12.400 make offer, pushrods not sure of brand, I have 7 heavy duty @11.175 and 18 lighter duty, 8 heavy duty@11.795 and 24 lighter duty, was used on veney alcohol set up make offer. more pushrods 10 @11.815 and 15 @ 11.590 make offer. 2 sets of kb stg. 10 main cap sets and 1 set for bae 98 block B/O. New crane cam 11/32 single grove keepers # 99091-1 B/O Head studs complete for kb stg 10 or bae 98 blocks 9/16" tops, 1/2" bottoms $250.00 or b/o New veney valve cover gaskets 4 sets with metal in center and 6 regular sets mr gasket $160.00 Moroso mechanical tach #51140 12,0000 rpm, 4" face and drive cable B/O. Auto meter pro comp tach with memory 11,0000 rpm B/O.
Shipping from ny , except paypal. Call 845-235-9768 or text. No calls after 8 pm eastern

 

bump

 

BB/FA can you send picture s of this tach?
0 Moroso mechanical tach #51140 12,0000 rpm, 4" face and drive cable B/O.

aafa760@gmail.com

 

pic sent

 

bump

 

bump

 

bump