manifold spacers

Discussion in 'PSI Superchargers Tech Questions' started by Bennett, Jul 14, 2009.

  1. Bennett

    Bennett New Member

    Joined:
    Feb 1, 2006
    Messages:
    32
    Likes Received:
    0
    Installed the Intake and there is a .200 gap between the top of the block and the intake. Does anyone sell spacers for this? It's a Arias Century10.7 block Big Chief Olds engine. The block is drilled and tapped up top for this I'm guessing.

    THanks
     
    #1
    Bennett, Jul 14, 2009
  2. SoDak

    SoDak Active Member

    Joined:
    Dec 29, 2006
    Messages:
    1,524
    Likes Received:
    3
    Could it be setup for an aluminum piece to be bolted to the block. This would be the piece that holds the foam which acts as the seal to the intake?
     
    #2
    SoDak, Jul 14, 2009
  3. Brad Hiatt

    Brad Hiatt Member

    Joined:
    Oct 22, 2004
    Messages:
    144
    Likes Received:
    0
    Send me a PM and I will send you pics of mine. I have the intake off right now. Might give you some ideas.
     
    #3
    Brad Hiatt, Jul 14, 2009
  4. Bennett

    Bennett New Member

    Joined:
    Feb 1, 2006
    Messages:
    32
    Likes Received:
    0
    pm sent.......
     
    #4
    Bennett, Jul 15, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM