Mallory Mag IV Spark Plugs?

Discussion in 'PSI Superchargers Tech Questions' started by MoparMartian, May 24, 2009.

  1. MoparMartian

    MoparMartian Member

    Joined:
    Dec 16, 2008
    Messages:
    128
    Likes Received:
    0
    I have a Mallory Mag IV with 3.97Amp output. I know you are supposed to run about .016 gap, but which spark plug. I need one with a ground strap, so the NGK side cut ones are out.
     
    #1
  2. hemi altered 378

    hemi altered 378 Blown Altered

    Joined:
    Jul 3, 2004
    Messages:
    864
    Likes Received:
    0
    we run a B10ES from NGK, they have a strap like a regular plug. you might want to open up the gap a little with a Mallory mag. i think we ran about .022 with a 5 amp Mallory. i am sure someone on here will remember better than i do. hope this helps a little
     
    #2
  3. MoparMartian

    MoparMartian Member

    Joined:
    Dec 16, 2008
    Messages:
    128
    Likes Received:
    0
    Excellent... I believe with the Mag I am going to run about .016 on the gap. You only hurt the coil if you open up the gaps. (That's my understanding from Don Zig)
     
    #3
  4. jim phillips

    jim phillips ta/fc

    Joined:
    Apr 29, 2007
    Messages:
    1,242
    Likes Received:
    0
    mag IV 14-16 will work fine
     
    #4

Share This Page