Mag Drive Help

Discussion in 'PSI Superchargers Tech Questions' started by pennance, Nov 28, 2009.

  1. pennance

    pennance Member

    Joined:
    Apr 18, 2009
    Messages:
    126
    Likes Received:
    0
    I got an older dual mag drive. It looks like a dunn but dunn says its not his. I need a new drive gear. The drive gear has a keyway cut in it. Also the gear has 2 or 3 allen bolts in it to support a steel bushing on the bottom end of it. Any ideas whos it is???? It looks exactly like a dunn.:confused:
     
    #1
  2. bruce mullins

    bruce mullins Top Dragster

    Joined:
    Aug 2, 2003
    Messages:
    999
    Likes Received:
    5
    enderle made dual drives also.
     
    #2
  3. REEHL EQUIPMENT

    REEHL EQUIPMENT Authorized Merchant

    Joined:
    Mar 17, 2004
    Messages:
    1,009
    Likes Received:
    1
    Sounds like an Enderle.

    The drive gear on many of those had the steel bushing on it.
     
    #3
  4. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    you have any pics?? Dave
     
    #4
  5. Spud_Miller

    Spud_Miller New Member

    Joined:
    Sep 1, 2006
    Messages:
    58
    Likes Received:
    0
    If the belt and pulleys have rounded teeth, it's a Dunn. If they have regular trapezoidal teeth, it's an Enderle. I've rebuilt a few of each and that's about the only difference except for the bearing arrangement in the "candlestick".

    Spud
    www.fuelinjectionent.com
     
    #5

Share This Page