Lots of parts and tools still available plus a new list of stuff at the top of list

Huge list of fuel and alcohol hemi parts and tools for sale



Lots of Fuel and Alcohol Parts and Tooling For Sale:

NEWLY ADDED ITEMS
1 Altalab II Weather station complete with pager 1250.00
36 New Cans of Prizm Blower Lube 16.00 per can
Trick Titanium 9.400 bell housing.....new liners ....small hole....$ 2200.00
Billet case PSI blower .....PSI insert .....9 5/8 opening......$ 5500.00
Dunn dual mag drive $ 475.00
Three 8 stand East/West tit clutches complete $ 3500 ea. certified
Two Billet PSI cases $ 2200.00 ea.
Billet AJ blower case , like new , 9” opening .....$ 2800.00
Rage 98 gpm pump .....$ 2200.00
COMPLETE RACEPAK PRO II SYSTEM WITH DASH 14,000.00 will not sell dash separate
NEWWAY CUTTERS 350.00
NEW MAHLE CB1512VL(30)-2 170.00 sleeve
NEW MAHLE CB1512VU(30)-1 225.00 sleeve
NEW MAHLE MB3248VL(24)-1 200.00 sleeve
NEW MAHLE MB3249vu(9)-1 210.00 sleeve
NEW MAHLE MB3249vl(9)-1 200.00 sleeve
NEW MAHLE Perfect Circle 303-0186B Bulk box oil rings 75.00
BAE Fuel Billet Block 4.187 Bore Standard Main 1 1/16 Lifter bore Nice 4200.00
PSI Dual Mag Drive 850.00
JT STEWART Cannon 1000.00
Set of Weld Magnum Double Bead lock Wheels 15.3 16x16 5x5 5inch Backspace 18 bolt nice 1200.00 set
Large magnesium Murf McKinney CO2 Air bottle clamp 161-AM 45.00
1 Small CO2 bottle with small reg 120.00
1 Dragster reverser handle 8.00
1 Titanium Dragster bell housing arm 150.00
1 McKinney Clutch bell crank for dragster M-269 25.00
Various new and used push pill cables contact me for price and length $$$$
3 Taylor Fuel Dragster Diapers great shape 590.00 each
Set of new McKinney 1" drop front A-Arms for dragster 300.00 set
Taylor Used Dragster Manifold Diaper comes with new under pad 175.00
1 Section of New Taylor Chassis Wrap 40"x8" 50.00
1 Good Used Bullet Fuel Cam 6 Bolt Hub 500 298 302 47 Swap 300.00
8 Olsen Piston Racks 6 used 65.00 each/2 one race used 100.00 each
Murf Dragster Chrisman Rearend Plates used 175.00 set
New Hemi Head Valve Cover Gaskets Steel insert FelPro 1657 22.00 each
NEW BAE/KB Hemi FelPro 1834 Hemi Oil Pan Gaskets steel insert 28.00 Each
New TFX/Rodeck Hemi FelPro 1838 Oil Pan Gaskets steel insert 28.00 each
McKinney Dragster Brake Handle std dragster not 5/16 with carbon grips 70.00
Good used set of Weld Magnum Bead lock wheel centers removed to install 15.4 update 170.00 each
Short Body 15 Gallon Spitzer 15 Gallon fuel dragster fuel tank shelf and two doors 450.00 like new
2 McKinney tall body 15 gallon fuel dragster fuel tanks 250.00 each
2 Sets of enderle manifold stainless hardlines 75.00
2 manifold distribution blocks 100.00 each
2 enderle hat distribution blocks 45.00 each
2 sets of Goodridge lightweight injector/blower hat lines nice 125.00 set
1 Set of small tube McKinney Fuel Dragster chrome Moly Forward Struts 82" 350.00 set
1 McKinney Fuel Tank Door kit for body Magnesium 45.00
1 PSI Std Fuel Blower Rear Bearing Plate 300.00
2 used -20 Wiggins clamps 20.00 each
80 New CP 1.620 Fuel Pistons 4.187 small ring 60.00 each
2 Racepak Pro II Download Cartridges 75.00 each
1000 Tall Green stall springs 40.00 set of 6
Good Used 104" Leahy Grey Cable for ignition changed every 4 races125.00 each
1 New McKinney Titanium Dragster rub block 120.00
6 CNC Engineering 8 Stand Clutch Pack Loaders 75.00 each
3 Sets of good Crane 1 1/16 wide wheel fuel lifters 350.00 a set
2 New Waterman -6 Inline Check Valves Red Aluminum 65.00 Each
2 New Kepner Products Inline -6 Aluminum Check Valve Inline 65.0 Each
1 Good Used Waterman Gold Fuel Shutoff 200.00
New std 4.187 lightweight sleeves and oversized .040 sleeves 60.00 each or refinished by Wilkerson for 38 each
9 New A-1 9/16 Flywheel Studs for 5 Disc Clutch 14.00 each
New Aetna A3535 Throwout Bearings 35.00 Each
9 New TKO Japan Bearing Support for Crank Ne Replacement Roller Bearings 35.00 Each
1 New RCD Titanium Bearing Support with Bearing 300.00
6 Std RCD Hemi Fuel Pump Extensions Black 225.00 Each
7 Std Hemi RCD Single Bar Idler Assemblies with Adjuster Screw Hole and Blower support Stands 285.00
9 CNC Mag Drive Support Brackets 80.00 Each
3 RCD Mag Support Brackets 50.00 Each
8 RCD Aluminum Idler Front Support Bars 65.00 Each
6 PSI Crowned Idler Pullies 165.00 each
2 Good Small Hex Oil Pump Drive Shafts PSI 45.00 Each
8 RCD Midflange Degree Rings W/magnets 100.00 Each
6 Good Used PSI Bearing Support Crank Hubs Steel 75.00 Each
1 RCD Bearing Support Steel Crank Hub w threaded nut for Pulley setup 100.00
1 Good used 6 Run PSI Crank Gear Splined 50.00
3 Good Used Large Drive Std Extension Pump Driveshaft's 45.00 each
1 PSI Setback Drive Snout for Fuel Blower 650.00
1 Billet PSI Front Cover for Fuel Blower 300.00
13 New std Hemi Spark Plug Tubes 9.00 each
2 Good Used Fuel Pump Band Clamps Quick Disconnect 25.00 each
4 Billet Magneto Clamps Medlen 95.00 each
Various Pushrods lengths and types tell me what you need $$$$$$$
Various Grind fuel camshafts tell me what you need $$$$$$$
Std Fuel Down Nozzle Fuel Rails for heads titanium 175.00 each or stainless 150.00 a set no jumpers but I do have
1 AFT 12 Lever clutch cover bare old school 250.00
5 Titanium Idler Pulley Studs and back spacer 90.00
1 TAK Titanium forward inlet fuel blower lower restraint plate 500.00
3 Good Used PSI setback fuel Blower quill shafts 175.00 each
2 Psi good used drive couplers 100.00 each
3 Psi Drive Snout Collars for starter cage 75.00 each
1 Set of good used spritzer carbon fiber mudflaps 750.00
1 Manifold deck height dial indicator plate jt stewart 1000.00
1 NEW 5 Gallon Pale of RED LINE Heavy Duty Shockproof Gear oil 275.00
2 Larry Miersch 48 Volt Starter Battery Packs with Charger and remote switch 800.00 each
1 Triple T Bead lock tire tool to work tire onto bead rim 225.00
1 Set of triple T engine lift bars 175.00
1 New Jet Hole Gage to size fuel jets properly 250.00
1 Electrimotion Leahy Pit Clock Digital 165.00
1 Spark Plug T Handle Torque Wrench 80.00
1 New Inferred digital track temperature gun 60.00
2 BAE Cold Sleeve Pullers 125.00 each
1 BAE Sleeve slide hammer 125.00 all steel
1 DJ Safety Carbon Fiber Dragster bucket 525.00
1 Set of Valve Cover Blankets TAK needs a little repair singed outside layer on one side 250.00
1 Set of Dual Plug Valve Covers Mag with Titanium cover shields 1000.00
3 Sets of Hartman aluminum engine cover plates 40.00 each
5 engine cradle dollies to hold spare engines on 100.00 each
1 Moroso BAE/KB dragster wet sump oil pan 275.00
92 New A-1 Flanged 9/16 head nuts with 11/16 12 pt head 5.50 each
4 Leahy TDC Pickups 90.00 each
5 Leahy long pickups 90.00 each
4 Leahy short pickups 90.00 each
200 New 6pt 5/16 fine thread jet nuts .80 each
40 New 1/4-28 6pt jet nuts .40 each
20 New 1/4-28 12pt jet nuts .40 each
6 6 Run Winberg Top Fuel Crankshafts with PSI Spline 500.00 each
1 Small AFT Slide Valve 300.00
20 New Titanium Cluff Style Exhaust Hemi Rockers with interchangeable tips 275.00 each
13 Large Used BAE Exhaust Rocker Arms Great Shape large adjuster 150.00 each
6 New BAE Exhaust Rocker Arms Great Shape large adjuster 245.00 each
8 1 Run JESEL 1.7 Top Fuel Hemi Rocker Arms Intake 200.00 each w adjusters
2 Good used 1.6 Stage V Intake Rockers 40.00 each
4 New Stage V 1.8 Intake Rockers 75.00 each
1 RCD BAE/KB Billet gear drive w/idler gear non-bearing support 550.00
1 RCD Flat Hemi Degree Ring w/magnets 75.00
1 RCD Splined Crank Hub Non Bearing Support Good Used RCD Spline 50.00
2 RCD Good used cam gears 6 run 50.00 each
Tons of studs/bolts/nuts used and new just tell me what you are looking for $$$$$$
Various Lightweight fuel and oil lines available new and used tell me length and size you need $$$$$$$$$


RACK TOOLS:

Piston Compression Height Tool 1 $50.00
Piston Height Tool 1 $95.00
Rod Standard 6.995 1 $40.00
Rod Standard 7.015 1 $40.00
Rod Standard 7.011 1 $40.00
Rod Standard 7.035 1 $40.00
Piston Standard 1.690 1 $30.00
Piston Standard 1.710 1 $30.00
Piston Standard 1.757 1 $30.00
Wrist Pin Standard JT 1 $60.00
MOTOR PARTS


Used KB Sleeve Puller Head 1 $12.00
New Sleeve Puller Head 3 $50.00
JT Stewart 1.156x3.400 Nitro Wrist Pins 5 $35.00
Used JE Pin Buttons for Dome Fuel Pistons 94 $0.75
New JE Dome Style 4.187 Fuel Piston Big Ring 1.814 CH 46 $40.00
New JE Dome Style 4.187 Fuel Piston Big Ring 1.757 CH 2 $40.00
Used JE Dome Stye 4.187 Fuel Piston Big Ring 1.757CH 2 $20.00
Used JE Dome Stye 4.187 Fuel Piston Big Ring 1.712CH 5 $20.00
New JE Dome Style 4.187 Fuel Piston Sm Ring 1.712CH 3 $40.00
Used JE Dome Style 4.187 Fuel Piston Sm Ring 1.757CH 7 $20.00
New JE Dome Style 4.187 Fuel Piston Sm Ring 1.757CH 3 $40.00
New CP Flat Top 4.187 Fuel Pistons Small Ring 1.620CH 80 $65.00
Used GRP Fuel Hemi Rods 7.015 32 $25.00
Used BME Fuel Hemi Rods 7.015 10 $25.00
Used BME Fuel Hemi Rods 7.011 21 $25.00
Used GRP Fuel Hemi Rods 7.035 47 $25.00
New GRP Fuel Hemi Rods 7.035 5 $25.00
4.187 Akerly Ring Compressors 16 $15.00
JE Flat Top Pin Buttons Used 143 $0.75
Leahy Block Female Ground Plugs 7 $9.00
3/8 12PT Jet Nuts 74 $0.22
3/8 6PT Jet Nuts 95 $0.22
BLOWER


Used 1 Run 11mm Blower Belts 5 $30.00
New General Machine Dovetail Blower Whites 23 $8.00
John Potacki Orange Blower Strips for OD 156 $15.00
53 2 $95.00
54 2 $95.00
55 1 $95.00
56 1 $95.00
PSI Rotor Micrometer Standard 1 $125.00
PSI Clover Leaf Lathe Cutting Fixture 1 $50.00
Manifold Cover Plate 1 $20.00
Complete PSI Setback Blower Snout With Ti Shield,Starter Bracket, Belt Guard 1 $1,000.00
Manifold Distribution Block 1 $48.00
BME Carbon Fiber Injector Scoop 4 $340.00
BME Injector 3 $700.00
Used Small Burst Panels 12 $6.00
Used PSI Mag Case 14-71 Fuel Blower Cases 2 $300.00
TAK Front Titanium Blower Shield 1 $50.00
PIT

JB Solvent Wash Tanks 2 $200.00
FUEL & CLUTCH

Gold Waterman 105 Gallon Fuel Pump W/Shutoffs 1 $3,800.00
JT Stewart Whitey Valve For Main Jet 1 $125.00
JT Stewart Non-Linear Clutch Accumulator 1 $150.00
JT Stewart Clutch Accumulator Piston for Linear 3 $40.00
JT Stewart Clutch Accumulator Cover For Linear 1 $40.00
Automan Plunger Valve 1 $30.00
Swaglock Large Flow Valve 1 $30.00
NEW Enderle Fuel Port Line Blocks 1/8 Pipe/2-10/1-6 2 $30.00
McKinney -8/-10 Y Blocks w/AFT Gold Check Valves 1 $100.00
McKinney -8/-10 Y Block 4 $60.00
McKinney -10/-10 Y Block 1 $65.00
NEW XRP 71300 -12 100 Micron Fuel Filter 1 $120.00
Fuel Filter Cartridge 1 $35.00
New Set of Large Bore AFT Slide Valve O-Rings 1 $30.00
JT Stewart 8 1/8 Pipe Whitey Valve 1 $140.00
Waterman -8 Aluminum Check Valves 15 $45.00
AFT Gold -8 Idle Check Valves 2 $50.00
DJE -10 Check Valves 4 $45.00
NEW Keftner -6 Check Valves 4 $65.00
Assorted Enderle Main Jets 15-165 Contact for Exact Sizes and Quantity 98 $3.00
Complete JT Actuator 1 $35.00
Actuator Bodies 4 $20.00
Pistons w/Stems 3 $7.00
Small Tips 9 $3.00
Large Tips 2 $3.00
JT Stewart Accumulator Mounting Feet Sets 2 $7.00
JT Accumulator Quad Seals 12 $6.00
Large Assortment of EPDM O-Rings 1 $40.00
Waterman Used 1.000 Fuel Pump Gears 4 $45.00
Waterman -10 Check Valve Ported 1 $45.00
Assortment of Waterman Studs, Dowels and Bolts 1 $30.00
AFT Large Slide Valve Piston Brass 1 $65.00
New Waterman 1.400 Steel Fuel Pump Housings 3 $225.00
Used Waterman Black Fuel Pump Inlets 2 $48.00
Tall CO2 Bottle with top and NOS Regulator 1 $75.00
Gold Waterman Center Bearing Plate Small Pump 1 $50.00
Waterman Fuel Shutoff Arms 2 $7.00
Waterman Fuel Shutoff Spool 1 $18.00
Small AFT Slide Valve Quad Seals New 6 $3.00
Small AFT Slide Valve 1 $300.00
16 Stage JT Stewart Jet Style Fuel Management 1 $550.00
IGNITION

Setup Cap 1 $10.00
Phasing Rings and Tool Set 1 $45.00
8145 Points Boxes 5 $400.00
8132 Coils 1 Race 5 $150.00
Magnesium Murf Ignition Plates For Dragster 3 $225.00
8170 Ignition Box for Top Fuel 1 $450.00
Magneto Handcuffs 1 $100.00
Used Dual Plug MSD Hemi Wires Test Good 6 $145.00
MISC Spare Wire And Plug Parts 1 $125.00
CYLINDER HEADS

Complete AJ5 Fuel Cylinder Heads With Ti Nozzles/Ti Fuel Rails/H-11 Studs 16 $3,000.00
NEW Large Margin 2.450 Titanium Manley Intake Valves 5.620/Bead/.249 Tip 29 $85.00
Used Large Margin 2.450 Titanium Manley Intake Valves 5.620/Bead/.249 Tip 42 $35.00
WESCO Valve Stretch Tool 1 $75.00
Waterman Jet Hole Guage 1 $100.00
Large Margin Manley Exhaust Valves 1.925/5.020/.250 Bead Lock New 22 $40.00
Large Margin Manley Exhaust Valves 1.925/5.020/.250 Bead Lock Used 34 $23.00
Used Manley Triple Springs 425 and Up 16 $12.00
New Manley Triple Spring 51 7 $20.00
Assorted Crawford Drop In Jets 1000 Contact for Exact Sizes and Quantity 1 $3.00 ea
Assorted Waterman Aluminum Drop in Jets 3.00 Each
2 Bags of Intake O-Rings 1 $30.00
2 Bags of Plug O-Rings 1 $28.00
Standard Manifold Studs 4 $7.50
H-11 Manifold Studs 10 $15.00
H-11 Inner Head Studs Used 61 $15.00
Misc RS2 Dechellis Stands 10 $100.00
CLUTCH AND DRIVETRAIN

CNC Engineering Gen III Cover complete/3 Flywheels Complete/4 doughnuts Complete 25,000.00 will include cert and extras 1 season
Moritz 5 Disc Stands Sets of 8 4 $900.00
New and Used .156 Lockup Levers 11 1 $225.00all
New and Used .125 Lockup Levers 56 1 $700.00all
Used AFT 3/8 Wide .125 Primary Levers 10 $80.00
Set of AJ 3/8-.280 Wide Multi Radius Primary Arms 1 $300.00
Set of UUsed Aluminum Cross Shafts 2 $50.00
Used AJ Aluminum Clutch Fork 2 $70.00
used JT 28P3 Multi Radius Primary Arms 1 $300.00
Jt Stewart Bearing Carriers With Throwout Bearings No Linear Flag 3 $100.00
Jt Stewart Bearing Carriers No Linear Flag 2 $40.00
Lever Height Dial Indicator and Plate 1 $250.00
Rob Moore Drive Coupler Clamps 3 $20.00
Rob Moore 4 Inch Good Used Drive Couplers 3 $100.00
Rob Moore Reverser Front Bearing 1 $15.00
Rob Moore Reverser Rear Bearing 2 $25.00
Used JT Cannon Piston 1 $55.00
Used JT Cannon 5 Disc 2 $1,000.00
Good Used Rob Moore Input Shaft 1 3/4 Shallow 5 runs each 3 $190.00
Clutch Bleeder Tank 1 $165.00
Clutch Spring Tester 1 $250.00
New 8 stand clutch floaters SSI & Boninfante 400 $22.00
Trick Titanium 9.400 Dragster Bell housing Keyhole $2500.00
Chrisman 12" Rearend Complete w/Lamb Carbon Brakes 10,500.00
New Chrisman Rearend Spindle 1 $240.00
New Chrisman Old Style Drive Hubs Set 1 $180.00
Used Chrisman Pinion Housing 1 $190.00
New Chrisman Drive Coupler 1 $165.00
Box of Used Aluminum Chrisman Lug Nuts 1 $45.00
Used Chrisman Axle 2 $450.00
CHASSIS PARTS

New Simpson Black 10' Chute Bags 6 $45.00
Dragster 2 1/4 Aluminum Main Fuel Line Straight Tubes 6 $75.00
Murf NEW Titanium Dragster Wheelie Bar 2 $2,000.00
Murf McKinney Coated Motor Plate for Dragster Used 2 $225.00
Murf Mckinney Coated Motor Plate for Dragster New 1 $850.00
Mageira Triple Element Spill Plates 3 $450.00
Big Tube Carbon Fiber Belly Pans 2 $1,250.00
Mageira Triple Element Rear Top Fuel Wing Current Certification 1 $6,000.00
Mageira New Style One Piece Front Wing w/ Current Tag 1 $5,700.00
New 120" 1/4" Throttle Cable 1 $85.00
MORE PARTS THAT ARE AVAILABLE


28 GOOD VICTORY 10 DEGREE TITANIUM DUAL SPRING RETAINERS VTR-PAC-10 6.00 EACH
5 BILLET MAGNETO CLAMPS 95.00 EACH
1 PUSHROD RUNOUT TOOL 80.00
3 MCKINNEY DRAGSTER BRAKE HANDLES 75.00 EACH
3 CASES OF PJ1 FORK OIL 20.00 EACH
VARIOUS FUEL CAMSHAFTS CALL
3 USED RCD STEEL SPLINED CRANK HUBS 75.00 EACH
1 USED RCD TITANIUM SPLINED CRANK HUB 100.00
8 NEW PSI CLOVER LEAF PLATES 75.00 EACH
22 USED PSI CLOVER LEAF PLATES 35.00 EACH
1 USED RCD BLOWER STARTER CAGE 40.00


TRIPLE T HEADERS - USED 5 $425.00
1-RUN 11MM BLOWER BELTS 1595-84 40 $45.00
4-NEW 11MM BLOWER BELTS 1595-84 $245.00 EACH
1-uSED 1 RUN 8MM BLOWER BELT $50.00

8142 one race checked pro mag 44 coils 150.00 each
8145 msd mag 44 Points Boxes 390.00 Each
Jt 4 valve clutch flow 175.00
2 new tubes of Manton 11/32 10 degree conventional square cut keepers 100.00 per tube
Used billet fram oil filters w one bracket 40.00
2 New -24 Wiggins Clamps 25.00 each
2 New -16 Wiggins Clamps 15.00 each
1 New -12 Wiggins Clamp 10.00
2 new -10 waterman aluminum check valves 35.00
New Dynamic Machine blower clover leaf stainless shims .002/.003/.005/.010/.015 7.00 each
NEW Aluminum Black Anodized Std 11mm GT 35 Tooth Blower Pulley 65.00
New Clampco engine band clamps (2) 150 7.50 EACH
Good Used Racepak Analog Box PRO II 55.00
New Racepak 500 lb transducer ProII 180.00
Used Racepak 0-5V Out 75.00
Used Racepak Batt Voltage Transducer 75.00
Used S to Z Pos Transducer 50.00
Used Temp Transducer 75.00
Used 400 lb Transducer 125.00
Used 150 lb Transducer 125.00
Used 60 lb transducer 125.00
Used 600 lb transducer 125.00
Used 750.00 transducer 125.00
New Manifold Temp EGT Probe 30.00
36" Racepak Analog Cable 35.00 Used
52" Analog Cable 45.00 Used
60" Analog Cable 45.00 Used
15' Temp Cable New 100.00
68" Temp Cable New 70.00
14' New EGT Cable 180.00
13' Used EGT Cable 100.00
1 Good Used Set of EGT Probes 100.00
49" New Flow Cable 75.00
115" Used Flow Cable 50.00
30" New 3 Pin Cable 40.00
37" New 3 Pin Cable 40.00
88" New 3 Pin Cable 50.00
6 NEW ARP Manifold Studs 3.980 Long 10.00
100 New SSI .350 thick 4 groove 3/8 wide cutters for 8 Stand Clutch 30.00 EACH
1 New set of Lee Beard LBR3 Primary Clutch Levers .375/.280 Multi Radius 350.00
1 Used Set Nice Alan Johnson Multi Radius Clutch Primary Levers .375/.280 200
1 New Speciality Fastners Large Burst Panel Kit Frame, Panel, Screws 20.00
1 Set of New Titanium Bellhousing Studs for Cannon 35.00


FRONT WHEEL PARTS ALL NEW
Seals
Timken 471795 6.50 each
CR/SKF Seal 14844 7.00 each
Federal Mogul 353141 5.00 each
Federal Mogul 253099 3.00 each

Races
Timken 67204 9.00 each
Timken 03162 8.00 each

Bearings
Outer Timken 03062 15.00 each
Inner Timken 07098 10.00 each

THERE ARE FAR MORE PARTS AVAILABLE THIS WAS JUST A TASTE OF WHAT IS HERE.



Some prices are negotiable. Contact Scott Gaddy at 704-778-6974 or nitrostacker@gmail.com

 

Hi Scott, I will take all your jet nuts and your bead lock tool..Dave