lifter bore spacing?

Discussion in 'PSI Superchargers Tech Questions' started by cjo632racing, May 22, 2014.

  1. cjo632racing

    cjo632racing Member

    Joined:
    Jan 14, 2014
    Messages:
    43
    Likes Received:
    0
    I bought two hemis and am new to the game been on this site a lot and have learned a lot, but still have many questions. I am now on lifter spacing, I have Brad 5 heads and I just measured the lifter bores and they are 1.8 space. I have already started the motor and the pushrods just touch the block at the bottom just a little, no pushrods rub the heads. my question is will this work? Does the lifter spacing need to be 1.9+?
     
    #1
    cjo632racing, May 22, 2014
  2. KEITH CLARK

    KEITH CLARK Member

    Joined:
    Oct 13, 2004
    Messages:
    300
    Likes Received:
    1
    lifter spacing

    just clearance the block
     
    #2
    KEITH CLARK, May 27, 2014
  3. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,420
    Likes Received:
    16
    You really should have the 2" spacing for the Fatheads but I knew a guy who used the 1.8" with fatheads and he just clearanced his block a bit, I think he had an older KB block.

    Best wishes,
    Trevor Sherwood

     
    #3
    Soldierboy0098, May 28, 2014

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM