Kobelco k8 and k11 id

Discussion in 'PSI Superchargers Tech Questions' started by NITROBANDIT1, Sep 1, 2013.

  1. NITROBANDIT1

    NITROBANDIT1 LOST IN SPACE

    Joined:
    Apr 18, 2005
    Messages:
    653
    Likes Received:
    2
    thought there was a thread on this, but couldn't find it. im looking at a pair of older kobelcos hi helix blowers. trying to id them as a k8 or k9,k11 rotor? any easy way of doing this before I buy them? I know the k8 had some problems, but these have been ran and didn't blow up, so must have been a good one? any ideas?
     
    #1
    NITROBANDIT1, Sep 1, 2013
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Call Darren Meyer at DMPE. He made them all when he worked for Kobelco. The best thing is to get the serial number of the blower and call him.
    http://www.dmpeinc.com/superchargers/
     
    #2
    Mike Canter, Sep 1, 2013
  3. NITROBANDIT1

    NITROBANDIT1 LOST IN SPACE

    Joined:
    Apr 18, 2005
    Messages:
    653
    Likes Received:
    2
    Discharge on my rotor

    thanks mike, ill do that. I hope these are good ones.
     
    #3
    NITROBANDIT1, Sep 2, 2013
  4. Ken Sitko

    Ken Sitko Super Comp

    Joined:
    Oct 21, 2003
    Messages:
    759
    Likes Received:
    0
    K8 rotors are very thin between the Teflon groove and the lightening hole.
     
    #4
    Ken Sitko, Sep 2, 2013

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM