kb block ,lenco ,fuel heads ect.

Discussion in 'Noonan Classifieds' started by Brendan, Nov 23, 2014.

  1. Brendan

    Brendan Authorized Merchant

    Joined:
    Feb 22, 2010
    Messages:
    264
    Likes Received:
    1
    kb block ,bearings ,fuel heads ect.

    392 Emory/Rodeck BILLET block #007 has been repaired with sleeves and studs ,
    Olson oil pan
    Billet Valley cover
    complete geardrive with extension and camshaft , 6900.00

    12# safecraft fire bottle new in box 150.00 i have 2 150 .00 ea.

    BAE oil pan gaskets 15.00 ea.-3 for 25.00

    Clevite 1512 M rod bearings tray of 30 145.00

    426 3" main bearings 45.00 set

    426 std main bearing sets or .010 sets 50.00

    4.187 ring sets 50.00
    4.250 ring sets -50.00

    KB sleeves 4.600 no step 4187 need to bore to 4.250 20.00 ea have 20.00



    1 front weld/american 10 spoke dragster wheel (bent?)and 2 hoosier front tires 100.00

    powerglide trans sheild 25.00

    Trick aluminum a-fuel scoop -150.00

    crane 426 lifters .904 -125.00 -

    Dunn dual mag drive for 426 175.

    RCD? Toothed idler pulley 3" 100.00


    Olson zoomies dragster coated EGTs (fuel ,brad/ kb heads ) 300.00 set

    Titan pedal clutch 10" with 2 discs like new 1200.00

    426 clutch can -no cert -300.00

    candelestick 25.00


    SPE starter nice older style small starter -350.00

    square enderle Barrel valve - 50.00

    kb mag valve covers 350.00

    black burn down breathers -100.00 set

    426 4.500 crankshaft -850.00

    426 4.375 crankshaft - 800.00

    426 KB block solid 1" lifter no repairs std cam location ,std cam size ,4.187 sleeves with main bearings -nice peice 3000.00

    426 KB gear drive - 400.00

    426 camshafts 100.00 ea blown alcohol KB/brad

    13.9 pulleys call -

    392 clutch can w/cert complete ready to bolt in ...and Crower 3 disc Glide clutch 3 runs on it aluminum
    2650.00

    Enderle -12 fuel shut offs 50.00 ea.


    10' chute nice clean with pack and pilot-185.00

    Weld wheel bead lock rings from T/F car black 60.00 ea

    hot clutch rack 25.00

    * mm pulleys call for numbers

    Mallory new Hemi wire sets 85.00 set

    AFT clutch timer box and lockup solonoid 250.00

    Mooneham 6-71 alcohol blower with retro case full teflon 7" snout 2200.00

    drive line fine spline female couplers 50.00 ea lots to choose from -


    front engine dragster /funny car lower containment pan 75.00 - (call for photos measurements

    SAE magnesium steering spool,
    (for air lines to steering wheel)
    $150.00


    Molonari Pedal clutch complete as new
    -10" , 2 disk
    - 1 used floater/ 2 new floaters
    - call for specs., 3 runs since new
    $ 2800.00

    Donovan 417 wet block/girdle. #312 good 4.250 sleeves. Block has no
    > repairs and is very nice, only repair is to girdle in a small place.
    > $3500.00
    >
    > Donovan Engineering anodized 417 valley cover. Used - Excellent $250
    >
    > Mallory 392/417 Mag III, NEW. New FIE cap, new coil, new Childs & Albert
    > billet clamp, excellent used wires. $600
    >
    > Mallory 392/417 mag base, NEW. $150
    >
    >> Olson 417 gold steel oil pan. Used - nice $350.00
    >
    > > RCD 8mm GT 57 tooth magnesium pulley 3 inch wide. Like new. $150
    >
    > RCD starter bracket and belt guard. Used - Excellent. $125
    >
    > RCD hub and degree ring. Used - nice. $100
    >
    > Ed Pink billet steel hub bolt. NEW. $70
    >
    > Childs & Albert steel starter dogs. Total of 3 NEW. 1 used. $150
    >
    >
    > 392 Browell 8 1/8 can, liner, candlestick, crossshaft, fork and throwout
    > bearing. Used (Mfg in 2008) - Excellent. $1100
    >
    >354 McKray heads. FRESH from Bob, never bolted on. 331 Hemi castings. Manley
    > SS valves int and ex, Manley springs, o ringed, 331/354 manifold spacers.
    > One extra set of springs. Set up for alc. $3000.00
    >
    Mallory super mag 5 with coil – 485.00

    Enderle 110 pump new 589.00

    Enderle 80.a pump 499.00

    big block Chevrolet 2-1/4 Zoomies new 398.00

    Blower Shop 8-71 polished blower set up for gas with snout-2250.00

    BDS 6-71 retro blower billet rotor 2650.00

    Littlefield 6-71 alcohol blower fresh service 1500.00

    Donovan 392 hemi polished valve covers with breathers 1050.00

    new big block blown gas Arias pistons lots in stock from 680.00 set

    392 clutch can 7-1/2deep with 5/8 ring candlestick -375.00

    small block Chevrolet zoomies –298.00

    Vertex magneto with wires ready to run –450.00


    8 MM blower pulleys tons used call for numbers as they are changing

    alcohol bird catcher with k valve 1395.00 new

    Billet 1" up 2" forward injector spacer on sale! 195.00

    392 blower hub with degree ring 220.00

    427 blower hub with degree ring 220.00

    used 6-71 /8-71 blower restraint with tabs - 150.00

    Enderle -8 3 way fuel shut off 80.00

    Racecarparts .com DZUS tool -5.00 or free with 100.00 purchase

    All Aluminum PISTON rack - 150.00 holds up better

    EGT brackets for headers AJ or Brad !-trick 40.00 stainless

    8 spark plug rack to tune like a pro- 20.00

    16 spark plug rack all anodized aluminum 25.00

    fine spline male/female coupler 45.00-lots of couplers

    Polished 417 donovan valley cover with oil fill cap 95.00

    RCD 5-1/8 snout 150.00

    RCD clamp on starter bracket and belt guard 295.00

    8mm blower pulleys 55,64,63,65, -65.00 ea

    Kinsler fuel injection for sb chevy very nice Jr/Fuel setup -2500.00

    Taylor 14-3 restraint blower bags -6-71 -no wrap around bag -475.00

    2 MSD 44 amp black coils - tested @ BR -95.00 ea.

    MSD caps rotors 20.00 pr. -good spares

    Big block Chevrolet Tunnel ram injector , with new hat - 1500.00

    Mallory super mag 2 or 3 $385.00 with base and transformer 485.

    426 hemi or, 392 hemi or, big block chevy or small block chevy, Lightning billet aluminum connecting rods any length or pin size 900.00 set NEW!

    polished NEW Donovan 392 valve covers with breathers 1025.00 875.00 without polish

    sb crank support complete new RCD copy 875.00...complete with hub

    Check us for low low pricing on Titan, RCD, Arias, SCE gasket, Simpson, DJ safety, Akerly & Childs, Enderle, Blower Shop, Ferrea, King bearing, Billet fab, Weld wheel, System 1, Moroso, Darton, Venolia

    Check out our updated website for more great deals at WWW.RACECARPARTS.COM or call (408)266-3324 Brendan

    VISA/MASTERCARD - UPS SHIPPING EVERYDAY!



    Thanks ,
    Brendan Murry (408)266-3324
    www.racecarparts.com
     
    #1
    Last edited: Nov 26, 2014

Share This Page