JE piston clerance

wich maximum JE piston clerance ? because my engine have 0,011"
will be that I will have problems ?
spec my engine:
K-11 superman blower-45psi
13.5:1 compression
Hemi TFX billet block std deck
4500 stroke
4310 piston bore -DOME NITRO pistons
C&A DYKES rings
fat head-5
thanks very much
Andre

 

If your saying you have .0118 piston to bore clearances now, are you measuring the piston correctly. You better call JE and talk to them about where to measure there piston and how much for that piston (nitro piston?).

The 13.5 compression with 45 psi boost would also raise a red flag.

Blessings........Ron.

 

I don't see how he could have 13.5 comp. with nitro pistons, nitro pistons have no dome/ their flat top with fat head even if it had the min.92 cc head it would still be around 7.0 / 8.0 to 1 measure across the center of the wrist pin 180 *degrees, shouldn't have more than 0.010/ or less than 0.008 for a roots, 0.006 screw.

 

pistons

i use piston order