Info on the Davenport PSI Injector Spacer

Looking to move my PSI 4-hole old school injector up a little. I have heard mention of a spacer that Les Davenport has built.

Anyone have a photo, or description of what it is? How high, Does it move the injector forward? are there nozzle holes in it.....

My email is scotth@moroso.com

Thanks!!!

 

Davenplate

Scott,
Les made what is referred to as the "Davenplate". There are 2 sizes that I know of. The shorter one moves the injector flange slightly forward and up 1 1/2", while the taller one moves it forward and up 2 1/2". I have a couple of the 2 1/2" versions, since we have run one on the car for the last 8 years (or so). They haven't made any for years and are hard to find.
Marty

 

Part 2

And yes, there are a few nozzle holes (I believe 2 in the rear) provided.

 

Thanks for the info Marty!!!

I've had plenty of feed back emailed to me about this subject.

Ill take the info and make a decision later this winter...Thanks Guys!!!