Hemi shortblocks,promod parts,shocks,etc

2 pair of BRAD 5 cylinder heads complete with victory valves,PAC springs, studs and O-rings. Single plug heads on both sets. $3000.00 a pair

1 BRAD .100 tall intake manifold for screw blower. Never been welded on. Very nice shape. No nozzles or burst panels. $1000.00

1 set Red stand rocker arms. Stage 5 intake rockers. Manton adjusters 5/16 ball. Very good shape ready to go. $2500.00

KB stage 10 .100 tall 4.375 x 4.375 bore stroke no saddles been windowed but repaired and run
Bryant crankshaft dual keyway
GRP rods
Bullet camshaft
Arias pistons
Gear drive
$8,500 each. I have 2 for sale. please call and I can give you specifics on each. I can sell a complete longblock with the above parts ready to go right now for $15,000.00.

Santhuff shocks 7 runs since rebuilt. I have the dyno sheets. come with 110lbs springs SOLD
Koni shocks rebuilt at Strange.Not run since $500.00

Floater housing built by Tim Mcamis for a Wally Stroupe chassis.
17" bracket centerline 35.5" overall width
Bolt pattern is 5x5.5
Strange steel brakes
40 spline solid axles with a new spare set as well
Comes with 4 link bars and wishbone $3500.00

ACD autoshift for 3 speed lenco $300.00 like new

Computech Data Pro-45 computer. Has driveshaft,g meter,2 pressure and EGT $750.00

PSI large opening magnesium hat for screwblower with davenport billet spacer. SOLD

Neal Chance weld together converter for Brad hemi/14-71/powerglide combination NEW never run $750.00

RCD mini snout for screw blower SOLD

Meziere starter and billet steel flexplate for hemi. Bought new and never ran. $600.00

Call for details cell 515-571-6660 Neal Hinman

 

Can you send pics of hat to genydragracing@hotmail.com

 

Hi , can you let me have more details and pics of the shocks please .
waynenicholson@btinternet.com

 

Hat and mini drive are sold. Luck devil check your pm.

 

hello
where do the parts ship from
(city/state) ?
(or local pickup only?)
and at what cost to ship the 17" rearend/axles, to SW missouri? Springfield area.
thanks.
D.

 

They will ship from Webster city Iowa. I can get a quote via truck or I could meet u in Columbia,mo.

 

OK. Thankyou for reply.
Your 4 link width is 3 inches narrower than ours. (We can fabricate)
We would have to surgically remove our chassis brackets & relocate narrower 3", And buy/trade for new wheels with 5.5 BS...instead of smaller which we own.
Your wheel width is correct, but would not matter if we had to buy new beadlocs & change offset.
(our window of clearance is bout .250" . Tight do to old car an need 34.5" tires. to fit)
Still interested do to location as we can do exchange in person, as I've been burned, an need a floater for an OLD, low value car.

Any room to negotiate on pricing privately? If so,
Can we Call or text to my cell @ 417-655-4518.
If not..no harm and thank you for your time.
D.

 

The floater is sold. Thanks

 

hi any chance of some photos?
jodznigel@gmail.com

Floater housing built by Tim Mcamis for a Wally Stroupe chassis.
17" bracket centerline 35.5" overall width
Bolt pattern is 5x5.5
Strange steel brakes
40 spline solid axles with a new spare set as well
Comes with 4 link bars and wishbone $3500.00

Call for details cell 515-571-6660 Neal Hinman[/QUOTE]

 

Bump to the top