Hemi intake manifold end seals....

Discussion in 'PSI Superchargers Tech Questions' started by a/fd slngsht, Aug 20, 2017.

  1. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    314
    Likes Received:
    3
    Whats the best seal/sealant combination to use that will seal the front and back of tge intake to the block? Thanks
     
    #1
    a/fd slngsht, Aug 20, 2017
  2. TD264

    TD264 New Member

    Joined:
    Feb 23, 2016
    Messages:
    9
    Likes Received:
    0
    we use closed cell foam and silicone in the corners. It has worked for well on our roots and PSI blowers.
     
    #2
    TD264, Aug 28, 2017
  3. MaineAlkyFan

    MaineAlkyFan Active Member

    Joined:
    Oct 8, 2006
    Messages:
    367
    Likes Received:
    53
    Closed cell foam & weatherstrip adhesive.

    Chris Sauliner - Team Tigges
    Mechanic Falls, Maine
     
    #3
    MaineAlkyFan, Aug 29, 2017
  4. bob szabo

    bob szabo FC / altered

    Joined:
    Jun 30, 2005
    Messages:
    118
    Likes Received:
    4
    I purchased aluminum extrusion angle from the hardware store; adapted it to the seal surface on the block; to screw on below the seals and angle backup against the seals on the outside; never had a seal leak problem afterwords.

    Bob Szabo
    http://racecarbook.com
     
    #4
    bob szabo, Aug 30, 2017
  5. MaineAlkyFan

    MaineAlkyFan Active Member

    Joined:
    Oct 8, 2006
    Messages:
    367
    Likes Received:
    53
    We did the same thing after pushing some out during warm-ups at Richmond in 2015. Have not had any issues since. They are visible in this picture:

    Hemi End Seals

    Chris Saulnier - Team Tigges
    Mechanic Falls, Maine
     
    #5
    MaineAlkyFan, Aug 30, 2017
  6. hemi altered 378

    hemi altered 378 Blown Altered

    Joined:
    Jul 3, 2004
    Messages:
    864
    Likes Received:
    0
    If you have access to a mill, make a spacer that bolts to top edge of block. use countersink bolts and make it wide enough to put in an O-ring. No more foam
     
    #6
    hemi altered 378, Aug 31, 2017
  7. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    ^^^^^^. That's exactly what I did and have never looked back. Thought I was the only one to try that.
     
    #7
    jay70cuda, Aug 31, 2017

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM