Hemi flex plate with ring gear

Can anyone recommend a flex plate to suit a blown Hemi with a ring gear to suit an on board starter motor? Current ring gear is on the convertor but looking to make a change to the convertor. I really want to keep the on board if possible. TIA

 

Meizere hands down. You'll never look back

 

RING GEAR

 

I have a Meizier flywheel with ring gear, Also have a Ti Can for hemi to Lencodrive and a few converters Chance Converter if needed.
Thanks Bruce

 

Meziere

 

I have a hemi and an on board starter and I know you will need to run a 162 tooth flex plate and an RCD 24V starter with a 12 tooth starter gear. This system works great and the starter mounts to the mid plate. If you need any measurements etc., let me know. Chuck! maverick3504@gmail.com

 

I use CSR 16V starter and CSR flexplate. Use a cross over switch, start on the mag then flip to the trigger when it starts idling on its own. Works great and no need for 24V.