Help Hi speed Info needed

Discussion in 'PSI Superchargers Tech Questions' started by BUTCH, Mar 2, 2009.

  1. BUTCH

    BUTCH Member

    Joined:
    Sep 11, 2005
    Messages:
    374
    Likes Received:
    0
    Does anyone know were I can buy a valve that will open with CO-2 that I can run Akly through for a hi speed? The only one I can find will flow the same as a .085 jet, I would like to get one that will flow the same as or close to a .125 ? thanks for the info. 707 974 3185, Butch

    Will thanks for the site !!!!
     
    #1
    BUTCH, Mar 2, 2009
  2. mudmankipp

    mudmankipp New Member

    Joined:
    Oct 13, 2008
    Messages:
    71
    Likes Received:
    0
    butch, we use a nitrous solenoid with a jet holder plumbed down stream in the braided line. works good on our combo
     
    #2
    mudmankipp, Mar 2, 2009
  3. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    #3
    Mike Canter, Mar 2, 2009
  4. Eric Vollmer

    Eric Vollmer Member

    Joined:
    Sep 20, 2008
    Messages:
    143
    Likes Received:
    1
    Butch,
    Get it contact with Combo-Flo, he modified one of his fuel valves to be used with alcohol for us a couple of years ago. We bought two from him and have been using them ever since. They work flawlessly and have been great! Check out his website and give him a call, great guy to deal with,
    www.combo-flo.com

    Eric
     
    #4
    Eric Vollmer, Mar 2, 2009
  5. jim phillips

    jim phillips ta/fc

    Joined:
    Apr 29, 2007
    Messages:
    1,242
    Likes Received:
    0
    swagloc.com has the valves you need and there a whole lot cheaper air activated open and closed timers ect.
     
    #5
    jim phillips, Mar 2, 2009
  6. RACEFACE

    RACEFACE Member

    Joined:
    Oct 27, 2006
    Messages:
    73
    Likes Received:
    0
    Swagelok

    Butch hey the valve you are looking for in swagelok is b92f2-0
    or a 92f2-c check out there website see ya at the races steve:)
     
    #6
    RACEFACE, Mar 5, 2009
  7. blown375

    blown375 New Member

    Joined:
    Sep 9, 2005
    Messages:
    733
    Likes Received:
    0
    #7
    Last edited: Mar 5, 2009
    blown375, Mar 5, 2009
  8. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Are you talking about the NOS 16060 alky/nitro solenoid or a regular nitrous fuel solenoid. I have tested the 16060 on the car with 180 psi of air pressure and it works just great. There are a lot of racers using thes 16060 NOS solenoids to control fuel on blown alcohol cars. I would suggest that maybe either the NOS guy was confused or he had just worked in a 7-11 store last week.
     
    #8
    Mike Canter, Mar 5, 2009
  9. blown375

    blown375 New Member

    Joined:
    Sep 9, 2005
    Messages:
    733
    Likes Received:
    0
    HELLO MY FRIEND! YOU BE VERRRY HAPPY! WE FIX DA SLUSHY MACHINE TOOODAY! LOL


    Mike I asked about the 16060 alky/nitro solenoid today and that is what I was told ????
     
    #9
    blown375, Mar 5, 2009
  10. Outlaw68

    Outlaw68 Member

    Joined:
    Oct 14, 2007
    Messages:
    188
    Likes Received:
    1
    we run the NOS solinoids on our stuff. Works great, have used them for a while.
     
    #10
    Outlaw68, Mar 14, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM