Goodridge Injector Line Kits -INVENTORY REDUCTION SALE

Discussion in 'Noonan Classifieds' started by Will Hanna, Apr 20, 2016.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    DragRaceHose.com Injector Line Inventory Reduction Sale!!!

    We have decided to move some injector lines we have in inventory, so we are slashing prices to move these lines.

    Look at the last message in this post to see what we have in inventory. If you use at least 6 lines from our inventory, we will custom make the rest of your hoses to fit your length needs.

    Pricing and Inventory Below!



    Goodridge Injector/Port line kits

    How many of you have ever had one of your rubber injector port lines either come apart and plug a nozzle, kink and lean a cylinder, or have a little flash fire from the burst panels make them need replacing? How often do you replace them to prevent the above from happening?

    That's why many teams replace these rubber lines yearly, if not more often.

    Goodridge Hoses & Fittings, the manufacturer of choice in many top motorsports, has a MUCH better solution. Our 600 series injector line kits far exceed than the conventional rubber injector lines. You have probably seen our carbon look lines on someone's car.

    1. Teflon inner hose liner. Our 600 series hose is the same hose we use to make brake lines. The teflon inner liner significantly reduces the risk of having the inside of your hose come apart. It allows for a tighter bending radius and greatly reduces the risk of pinching/kinking. Since this line is approved for brake lines, expansion under pressure is almost non-existent.

    2. Less prone to fire damage - With a durable outer cover, our 600 series hose offers far better protection for your fuel lines. In the event of fire, you definitely don't want to give the flames any help by burning through your rubber lines to more fuel. Not to mention they're junk, and one more thing to replace in the ensuing thrash.

    3. They look cooler! - Carbon look outer braid. Who doesn't like carbon fiber?

    4. Our lines have been flow bench tested to flow the same as conventional rubber injector lines. We now use a AN4 line with AN3 end to ensure no flow restriction.

    PRICING:

    PSI Dual Nozzle kit (16 intake, 4 blower)
    Straight-Straights - $600
    Blower line 90 upgrade (4 lines straight to 90) $700
    All straights to 90 (20 lines straight to 90) $1100

    PSI Single Nozzle kit (8 intake, 4 blower)
    Straight-Straights - $360
    Blower line 90 upgrade (4 lines straight to 90) $460
    All straights to 90 (12 lines straight to 90) $660

    Pro Mod Roots kit (10 hat, 8 intake)
    Straight-Straights - $540
    Hat line 90 upgrade (10 lines straight to 90) $790
    All straights to 90 (18 lines straight to 90) $990

    8 port intake kit
    Straight-Straights - $240
    Straight-90 - $440

    Individual line pricing:
    Injector line up to 55", stainless straight fittings on both ends - $30 ea
    Injector line up to 41", stainless straight to 90 fitting - $55 ea (my cost on the 90 is $25)
    Injector line up to 41", stainless 90 to 90 - $75 ea

    Many popular sizes in stock ready to ship! IMG_1649.jpg

    Don't stop with injector lines, Goodridge has a solution for all of your hose and fitting needs.

    If you're in need of some hose, We got ya covered.

    Proud distributor for Goodridge Hoses & Fittings!

    Will Hanna, owner
    979-415-4959
    will.hanna@insidetopalcohol.com
    www.dragracehose.com
     
    #1
    Last edited: Jan 23, 2017
  2. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    front row
     
    #2
  3. jay70cuda

    jay70cuda Member

    Joined:
    Sep 30, 2009
    Messages:
    835
    Likes Received:
    9
    Why isn't there a price for a kit for a Hemi intake? Almost all of them are the same? Or price on a hat kit? Roots kit? Screw kit? I've asked 3 times over 6 months for a price on a Hemi roots kit? I understand there may not be a kit but you have to of built kits like this and can ball park price it.
     
    #3
  4. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    I used to advertise them as kits but got away from that because there are so many different variations, so I just sell them per line price, which is the same as the kit price.

    I have revised the pricing in the original ad to show kit pricing.
     
    #4
  5. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    front row
     
    #5
  6. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    front row
     
    #6
  7. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    front row
     
    #7
  8. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    front row
     
    #8
  9. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    Inventory clearance pricing:
    Straight to straight line: $20 (per line)
    Straight to 90 line: $45 (per line)
    Use at least 6 lines from our inventory below and we will match that price to build the rest of your lines custom fit.
    Use at least 8 lines take another 10% off (inventory lines only)
    Use at least 12 lines 15% off (inventory lines only)
    20+ 20% off (inventory only)

    We are going back to making lines to order since there are so many different size requirements so it just works easier to make them custom from the initial order. Take advantage of these low prices, they won't be this cheap again!!

    Straight to 90 Inventory
    Length from end of straight to bend of 90

    9.5" - 1
    10" - 4
    10.25" - 1
    10.5" - 2
    10.75" - 1
    12.25" - 1
    12.75" - 1
    13"-1
    13.25" -1
    15" - 1
    16" -2
    16.5" - 2
    19" - 3
    19.25" - 2
    19.5" - 2
    20.5" - 3
    21.5" - 1
    22.5" - 2
    23" - 4
    23.75" -1
    25.5" - 2
    26" -2
    26.5" - 1

    Straight to Straight (measured end to end)

    11" - 1
    19.5" - 1
    22" - 1
    23" - 2
    27.5" - 1
    32" - 1
    35" - 1
    37" - 1

    90 to 90
    20.5" - 1 (clocked at 12 o clock and 3 o clock)
    5.5" - 1 (12/12)
     
    #9
    Last edited: Aug 15, 2017
  10. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,843
    Likes Received:
    3
    I need 2 lines made 33" on both with straights on both ends.thanks Dave lowe
    620 249 5909 cell
    620- 231-8068 shop
     
    #10
  11. GottaGoFaster

    GottaGoFaster New Member

    Joined:
    Nov 17, 2016
    Messages:
    18
    Likes Received:
    0
    Hi Will--

    Looking for a set for my port injectors plus a couple misc lines. All straight to 90 lines. Here's the lengths:

    10.50, qty 2
    19.25, qty 2
    19.50, qty 2
    23.00, qty 1
    23.75, qty 1
    25.50, qty 1
    17.25, qty 1

    I think all but the 17.25 should be part of the inventory shown in the ad. Feel free to give me a shout to confirm price and delivery--chris at 612_412_301eight. thanks much.
     
    #11
  12. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,272
    Likes Received:
    37
    Limited amount of lines left. Use 4 lines from inventory and I will price match any custom lengths.
     
    #12

Share This Page