gerardot hat

Discussion in 'PSI Superchargers Tech Questions' started by wildride boy, Oct 15, 2005.

  1. wildride boy

    wildride boy Top Sportsman Racer

    Joined:
    Oct 3, 2005
    Messages:
    303
    Likes Received:
    0
    Hi ,
    When you switch from a bird catcher to a gerardor veney injector , is it necessary to richen fuel due to the increase of butterfly area . If so , how much is a good starting point
     
    #1
    wildride boy, Oct 15, 2005
  2. hemi altered 378

    hemi altered 378 Blown Altered

    Joined:
    Jul 3, 2004
    Messages:
    864
    Likes Received:
    0
    #2
    hemi altered 378, Oct 16, 2005
  3. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    CLAUDE, YOU MAY NEED TO CHANGE THE SPOOL IN THE BARREL VALVE AS THE BUTTERFLY SQUARE AREA INCREASES YOU ARE MORE LIKELY TO HAVE A LEAN CONDITION OF IDLE WHEN YOU SNAP THE BIG BUTTERFLYS OPEN. TO BE SAFE IF YOU HAVE SAY A 100 MAIN JET IN THE HAT YOU MAY WANT TO TRY STICKING A 85 OR 80 IN THE HAT BYPASS TO BE SAFE OR IT'S NOT A BAD IDEA TO MAKE A 300 FT. SQUIRT THEN A HALF TRACK TO MAKE SURE YOUR OK. I'LL HAVE NEW PICS OF THE ENDERLE BIG-UGLY TODAY AT WWW.RBSSUPERCHARERS.COM ON THE PRODUCTS PAGE. OR CALL 530-292-3040 THANKS JR
     
    #3
    RBS, Oct 17, 2005

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM