GBR Parts For Sale

Gutierrez Brothers Racing Parts For Sale

(1) PSI D-Rotor Screw Supercharger with RCD Magnesium Mini-Snout - $9500

(1) Molinari Titanium 10" 3-Disk Pedal Clutch (Clutch Inventory available as well) - $3000

() 10" Clutch Inventory - Call/Text for List of Parts

(1) Magnesium Trap Door Kit - $20

(1) RacePak EGT Cable 8' Long - $75

(26) Darton Sleeves - TFX .500" Short Deck - Used from 4.374"-4.380" Bore - $35 ea.

(1) Lenco Front Seal Plug - $10

(1) Browell Throw Out Bearing Collar 1.750" I.D. 2.100 O.A.L. - $25

(1) Billet Steel Clutch Fork 2.150" between Forks - $50

(1) Welded Steel Clutch Fork 2.580" between Forks - $50

(2) HPS Silicone Hose Adapter 1.750" - 1.500" Black - $10 ea.

(1) Set PAC 1353KJS Valve Springs - $125

(1) Lamb Carbon Brake Kit. 11.500" Carbon Rotors with Aluminum Hats (good only as spares), Calipers w/Pads (Pads close to minimum), Brackets for 3.150 Axle Bearing. Calipers in great shape - $500

(1) PSI Deep Throat Injector Shaft - New - $165

(1) FIE Remote/Change Over/Kill Switch - New - $65

(1) ElectriMotion Change Over Switch - New - $35

(1) Set of Smiley Headers for Dragster - Used - $525

(1) Pair of Simpson SFI 5 Black High Top Driving Shoes - Used - $20

(1) Pair of Simpson SFI 5 Black Driving Gloves - Used - $20

(1) Simpson Black Neck Collar - Used - $10

(10) Trend Solid 7/16" Tool Steel S7 11.450” O.A.L. 5/16” Ball Double Taper Pushrod - Used - $15 ea.

(10) Trend Solid 7/16" Tool Steel S7 11.850” O.A.L. 5/16” Ball Double Taper Pushrod - Used - $15 ea.

(8) 7/16" 11.700" O.A.L. 5/16" Ball Single Taper Pushrod - Used - $5 ea.

(1) Brad Hadman T/AD 7 Gallon Fuel Tank with Shelf. 1.500" Single Outlet - Used - $475

(1) RCD 33 Tooth RCD DRIVE SCREW Pulley, 3.500” OAL - Used - $100

(1) RCD GT 8mm-1600-75PS2 Blower Belt - New - $175

(16) DMPE Screw Blower Studs Coarse/Coarse - New - $45 per set of 8

(10) Trend M2 Wrist Pins 1.094 x 3.250 x .250 Straight Wall - Used (Polished) - $5 ea.

(5) Boxes of 24 ea. New Mahle High Tension 3/16" Oil Rings 4.375 Bore - $75 per Box

(1) Dragster Parachute Cable, Heavy/Thick Style - Used - $20

(2) Lamb Aluminum Brake Hats, 4.750 on 5 and 5.000 on 5 Bolt Patterns - Used - $15ea.

(5) Sets A1 Flywheel Bolts - Used - $25 per Set of 8

(2) Clear Visors for Simpson Helmet - Super Bandit - $20ea.

(2) Quarts Mark Williams Torco Racing Gear Oil 85w140 - $10ea. - Pending

(2) Bottles Synergyn Assembly Lube - $5ea.

(5) Spray Cans VHT Assembly Lube/Extreme Pressure - $3ea

(1) SX Performance Fuel Pressure Regulator Model 15410 S/N 81780022 - $75

(1) SX Performance Fuel Pressure Regulator Model 15410 S/N 82970003 - $75

(1) Flat Back 3.500" 14mm-GT 38 Tooth Magnesium Pulley - $65

(1) Flat Back 3.500" 14mm-GT 39 Tooth Aluminum Pulley - $65

(1) Flat Back 3.500" 14mm-GT 40 Tooth Aluminum Pulley - $65

(1) Flat Back 3.350" 14mm-GT 39 Tooth Aluminum Pulley - $65

(1) Center Flange 3.500" 14mm-GT 39 Tooth Magnesium Pulley - $65

(1) Center Flange 4.300" 14mm-GT 41 Tooth Magnesium Pulley - $75

(1) 3.500" 14mm-GT 29 Tooth Magnesium Pulley - $65

(2) 3.500" 14mm-GT 30 Tooth Magnesium Pulley - $65 ea.

(2) 3.500" 14mm-GT 31 Tooth Magnesium Pulley - $65 ea.

(1) 3.500" 14mm-GT 31 Tooth Aluminum Pulley - $65

(1) Flat Back 3.500" 13.9 39 Tooth Magnesium Pulley - $65

(1) 3.500" 13.9 30 Tooth Magnesium Pulley - $65

(1) 14mm-GT 3.400" Toothed Idler Pulley Magnesium - $135

(1) 14mm-GT 4.100" Toothed Idler Pulley Aluminum - $135

(1) RCD Bearing Support Trigger Wheel Light Weight - $75

(26) Used Enderle Brass "Long" Nozzles Bodies - $5 ea.

(48) Used Enderle Brass "Short" Nozzles Bodies - $5 ea.

(4) Nitro Special Large Burst Panels - $10 ea.

(3) Boninfante Large Burst Panels - $10 ea.

(8) Boninfante Small Burst Panels - $15 ea.

(2) 12AN RacePak Flow Meters - $550 ea.

(1) Steel Starter Dog 6-Hole - $50

(1) Aluminum Starter Dog 3-Hole - $40

(3) Knut Injector Butterflys - $30 ea.

(2) New SSI Starter Brackets with Gaurd - $50

(1) Trick Titanium Bell Housing 8 5/8" with Cannon Key Hole New Liners - $2500

(1) Trick Titanium Bell Housing 8 5/8" with Cannon Key Hole No Liners - $1750

Thanks for the space ITA!

Please call or text or email with any questions or for pictures

313.445.3305 JP

gutierrezbrothersracing@gmail.com

Thanks!

 

I'll still take the RCD 8MM GT belt.

 

Larry, give me a call I misplaced your number

 

do you still have carbon rotors

 

Don Reed, Yes I do however, they are thin though. Would be good for spares.