Separate names with a comma.
Discussion in 'Manton Push Rods Top Alcohol Tech Questions' started by Flyboy68, Jul 20, 2016.
Who can flow a fuel system in the midwest? C-rotor hemi.
www.fuelinjectionenterprises.com Spud did our d rotor BBC no problems other than what I F'ed UP...
Spud or Frank parks
Gorr Fuel Systems in Arizona.
Flowedge Fuel Systems in Knoxville, Iowa - Britt & Todd Micetich
Phone Britt - 515-556-1803
Phone Todd - 641-891-4082
Don Geredot in indiana 360 623 3048
Spike Gorr. Great to deal with. Stands behind there products.
Flowedge in Knoxville did a great job for us.
Consider this. If you have a fuel flow sensor on your data logger then in conjunction with Jetsize or AlkyPro software every run is a flow bench run of the system. The cost is about the same to install the flow meter and buying the software as it is getting the system flowed but you now own it.
I highly recommend Randy Anderson. He is very very thorough in going through and setting up a fuel system. It's not just the flow numbers, but the information you get when you get a system from him. When I drove TAFC, I did the whole get some nozzle sizes from someone fast and put this much fuel in it, then lean it until the egts get to 'x' and shoot for this many gallons. If I would have just had the system flowed by Randy I would have won a lot more rounds. When someone hires me I send their system to Randy. It's usually within 10 on the jet right off the bench.
Randy Anderson at Advanced power systems is the person to send it to hands down. He flowed a lot of the top cars in the country and like Will said not only will it be spot on when you get it Randy but you will get way beyond what you paid for in information from him. The parts you will save and the learning curve that he will help you skip is well worth the money. We have been 5.49 at 268 with the fuel system spot on what he sent us. The number at his shop is 909-944-2915.
Gorr flowed some pills for me fast turn around
Not one person mentioned Jon Salemi, Resolution Racing Services.
I would recommend Jon Salemi, very easy to work with and knowledgeable.
Glen at Rex Hutchison Racing Engines. Spent time going over all the details with me.