Fuel Pump Flowing

Discussion in 'PSI Superchargers Tech Questions' started by srxspec, Aug 2, 2015.

  1. srxspec

    srxspec Member

    Joined:
    Feb 17, 2012
    Messages:
    42
    Likes Received:
    2
    Is there anyone in the midwest who can flow a fuel pump quickly? Hurt a couple of pistons this weekend and need to make sure it was driver error & not the fuel pump going out. Will gladly next day air it wherever needed so it is there on Tuesday, just need it back by Thursday! Any recommendations?

    Pump Specs: Waterman lil bertha, was flowed in May by Waterman at 33.9 gpm
     
    #1
    srxspec, Aug 2, 2015
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    You might want to send it to Ralph Gorr at http://gorrfuelsystems.com/

    It would be pretty unusual for a Waterman Lil Bertha pump to have suddenly reduced flow. I would look elsewhere such as the fuel shutoff not being all the way open, or a fuel filter/screw being dirty. The other thing would be to check the port nozzle jet for those cylinders and make sure there is no dirt in it. Ignition timing being too far advanced will also cause that problem so check that.
     
    #2
    Mike Canter, Aug 2, 2015
  3. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    Gerardot
    260-623-3048
     
    #3
    john348, Aug 2, 2015
  4. srxspec

    srxspec Member

    Joined:
    Feb 17, 2012
    Messages:
    42
    Likes Received:
    2
    I believe this is what happened, but was hoping to double check pump, but after getting the motor apart, we were very lucky. It slightly scored 2 pistons and we got lucky! 2 new pistons, new rings in the other cylinders, and a hone job on the sleeves and I think we'll be ready for action again.

    I'm a little different setup than what you guys are normally used to, but there is a wealth of knowledge on this site that is applicable to much more than just drag racing! Thanks for the help!

    [​IMG]
     
    #4
    srxspec, Aug 2, 2015
  5. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    flowed

    I would get the pump flowed. It is not uncommon at all for a gear pump to go away and lose flow. Randy Anderson at 909-944-2915 is an excellent choice along with the other names mentioned here.
     
    #5
    Will Hanna, Aug 2, 2015
  6. blownapex

    blownapex Member

    Joined:
    May 25, 2006
    Messages:
    507
    Likes Received:
    4
    33 gallon pump
    I was wondering what kind of a snowmobile that was and how much boost it had
    ive done this 3 times and the rods were junk each time
    torque the rods and bore gauge them every time it goes lean
    mine were .005-.010 wider on big end -grp rods
    tape the fuel shut off
    duane rister
    also called several times your hard to get a hold of in the summer
     
    #6
    blownapex, Aug 2, 2015
  7. Micetich

    Micetich Member

    Joined:
    Oct 5, 2006
    Messages:
    76
    Likes Received:
    0
    Pump flowing

    Flowedge Fuel Systems in Knoxville, Ia. Contact Britt Micetich. 641-871-0158
     
    #7
    Micetich, Aug 3, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM