FS BAE rockers and more

1 complete set of Brad Anderson Black Stands rocker system for one engine
Stage 5 Roller Intake ,Brad's dual rib Exhaust , Stand , Shafts + 1 extra intake rocker and 1 extra exhaust rocker

In great shape

20 CP Pistons 4.467 bore # 4467-PMII-CP ( pro mod 2 )
Dome volume 32.6cc Pin Diameter 1.0949 Compression height 1.389
8 That ran but in good shape
8 that were installed but not run
4 new not installed or run
1000$ + the ride for the lot of 20


1 x Magnesium Intake manifold for -.500 block and fuel heads
(Keith Black Cut down and welded by WAR) 1050$

1x Set of Zoomies for fuel heads have been repaired

1 x Lenco CS2 1.56 Gear Set

1 x MSD 8132 Tach Converter 40$ (new)

2 x MSD 8134 Kill Solenoids 30$ each

1 x Starter/Engine 6 Holes Starter Jaw

3 x Lakewood 15975 Pilot Bearings (1 new 3 used) 25$ for the 3

1 x ISKY Big Block Chevy Roller Cam and 2 SETS of Lifters 290 / 304 Duration 240$

Contact here or by email at info@atelierhp.com
Forgot to add pics to the post, they are avaible, just ask an i'll email them
can be reached by phone also, just ask ;-)

 

Black stands = high Ratio

 

Rockers , gear set and zoomies Sold

 

Up, Still some nioce and usefull stuff

 

I went trough the pistons to be sure

CP PM2 4.467 bore

4 are brand new stil lin box
4 are new but have been installked but not run
7 used have about 5 test pass on them, still in great shape
4 used dome and rings lands are in good shape but have some cosmetic damage on the bottoms
34 pin buttons also available
could make a sweet deal on those

 

Edited sold parts

Thanks ITA!!

 

do you still have stands an rockers