FS: BAE 5/TFX 2000 541 Hemi with 4-7 swap

As the title states, we're selling a 541 Hemi with BAE 5 fat heads on a TFX2000 +.100 block. The rotating assembly has very few passes, none of which were with a screw blower. After the last time we went out the engine was torn down and inspected by BAE, where they also gave it a fresh hone. Then, all crank and rod bearings were replaced during reassembly. This engine also has a 4-7 swap cam.

4.375" bore x 4.500" stroke

0 passes since rebuild with new bearings. The rotating assembly and lifters have only seen 8 passes running a roots blower.

-BAE 5 heads with red rocker stands, stage V intake rockers and BAE exhaust rockers.
-Manley Titanium valves, and manley triple springs pn: 221449p.
-TFX2000 block +.100 tall with 4.375" sleeves
-4.5" Bryant billet crank, 0 passes since inspection and polishing by Bryant
-GRP 3303-pro Rods, 8 passes
-BAE custom pistons, 8 passes
-Morel/BAE 5447 lifters, 8 passes
-BAE +100 mag manifold
-RCD gear drive and pump extension, hard anodized black
-Custom Bullet cam for 4-7 swap
-System one Oil pump
-BAE mag valve covers powder coated black



Spares and other parts available, but not included in asking price:

-RCD mag drive, installed in the picture
-RCD fixed crank starter drive for boats
-hydro/flat bottom oil pan, installed in the picture.

Also have a pair of BAE 6 heads assembled with titanium valves and PAC springs, if interested call/email for info and pictures.

Asking $27,000 OBO for complete long block without pan.
More pictures and info available upon request, thanks for looking.
Michael Welsh
714 501 1427
mwracing02@aol.com

 

Are you selling valve covers, I am interested 7654385265,drmotorsports316@yahoo.com

 

Sorry, not interested in selling the valve covers separately.

 

What's the asking price on the Brad 6 heads

 

New price! Asking $23,900 for the longblock.

John- If you're still interested we're asking $4000 for the 6 heads. They have had 0 passes since being disassembled and inspected. They're assembled with PAC springs.

 

Do you still have Brad-6 ?

 

Can you email me the price for the spare angle mag drive from rcd ?

Thanks

Eric eric@alandmo.us