Front Motor Nostalgia Car For Sale

Nostalgia T/F NHRA Heritage Legal for 2014

Complete running Car



Rear motor plate to front end is all new with all NHRA updates

Updated 225” WB/ new Sterling front half with shorty body

Osborn canards an front wing

Front & rear complete spare motor plates

Donovan 429 cu in with after market griddle, able to check all mains with out pulling girdle

All titanium 10” glide clutch

Velasco 3.90 crank

Arias all new pistons

GRP rods

T/D rockers

Smith Bros push rods

Hot head valve covers (new power coat)

MSD 44 amp mag (red coil)

Strange 9 ½” ultra case rear end 40 spline axles

Carbon fiber brakes

Real racing wheels, full bead locks with Hoosier tires

Rob Moore reverser with custom dual sprag unit

DJ carbon fiber diaper (new certification)

Complete oil retention oil pan

Head pads

Foam fit driver insert

Engle roller cam / Crane roller lifters

8 5/8 trick titanium bell housing

RCD tri drive

Waterman 20.00 gpm certified fuel pump from Crawford

Complete dry sump system, System one oil pump

Hot heads converted set back manifold with Jackson nozzles

6:71 Retro blower with Korbeco rotors 8mm drive 40 lbs boost @ 9500 rpm

Taylor blower blanket (new certification)

Enderle bird catcher / Pete Jackson barrel valve

Racepac Pro1 computer with burn out recording (loaded)
AJ Billet Heads with Osborn aluminum exhaust diversion flanges and headers

Dual fire bottle system

American Racing front wheels with new late model t/f tires

New chute packs and pilot chutes (1 chute missing)

Rear tire covers


$50,000.00


Car is located two hrs. from the Las Vegas Drag strip

Butch Blair 925 229 3572 top fuel776@aol.com

Parts that could be included with the sale of the car
One complete AJ head ready to run with Osborn exhaust diversion plate

Spare Osborn exhaust diversion plate

12” wide new Real bead lock wheels. 2 ½” backspace, 5 on 5 ½” used set of 1300 M&H slicks

Lower end & clutch service trays

Spare motor plate with all attached hard wear

New GRP 3300 rods with L19 bolts

Smith Bros push rods, different lengths

2 Titan complete dry sump oil pumps

2 new side rails for girdle

MTI valve spring air gun (used with stainless valve retainers that are in all heads)

8mm gt pulleys

8mm blower belt (2)

Lots of 10” clutch disk and floaters

Air over hydraulic rear car lift with custom front car ramp

Custom tow dolly that lifts car and attaches to tow vehicle