FOR SALE AT RBS SUPERCHARGERS: Used Littlefield/GM Polished 6-71 Std. Helix

Discussion in 'Noonan Classifieds' started by RBS, Jul 16, 2015.

  1. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    Used Littlefield 6-71 polished alum. gas/alch/nitro sixty degree cast rotor blower. This is a blower that is perfect for a racer that doesn't have to make maximum power and wants to go out and have some fun on the weekend without breaking the bank. Blower has a little extra rotor clearance so it can be run on competition gas, alcohol or the good stinky stuff with no issues. Cast alum. rotors are stripped on the tops with nylatron and sides with Teflon to help keep the boost inside the engine and the case is heat treated cast alum. with a billet front cover as well as billet front bearing plate and a billet rear bearing plate. Rotors are heat treated cast alum. sixty degree that ride in precision hi-speed bearings that are timed by steel gears and have freeze plugs installed in the lightening holes to push more boost into the intake manifold to boost the power level. Top opening is 12.875" x 4.125" with bottom opening being 12.250" x 4.125" so it will not have to be set back on the blower manifold for the blower to seal. This blower will accept a Bug, Bird, or most of todays Carbon Fiber injectors with a 13.250" on center bolt pattern. Blower has fresh strips, new seals and is ready to go racing. Blower front cover has a oil sight glass and pressure relief valve installed to help the racer keep an eye on the oil level and check to make sure the front seals are holding pressure. For more pictures visit www.rbssuperchargers.com #7006-0006 $1,700.00 Order on line and mention this ad and get a free RBS t-shirt. (530) 274-3835 Thank you for looking at our ad.
     

    Attached Files:

    #1

Share This Page