FOR SALE AT RBS SUPERCHARGERS:Used 9.80" BBC Sheetmetal Blower Manifold W/Intercooler

Used 9.80" standard deck BBC fabricated PSI screw blower manifold. We got this manifold on a trade in and it is an amazing piece of craftsmanship that will make the new owner very proud to place this on the top of there engine. We are told it is a Hogan's intake but there is no name on it so not sure of the manufacture. Now for the details this intake is set up for a PSI screw blower but could have a roots blower bolted to it as well with no issues other than the o-ring groove will not line up and the racer will have to use a gasket. The top blower mounting plate is made from 1" billet alum. for rigidity and strength which has been relief cut for a magneto then below that is an intercooler which as we all know cool air is free horsepower. The intercooler core looks to be in excellent shape and is your standard four inch thick type cooler core. The cooler has a 3/4" pipe to -10 fitting on the rear and a 3/4" pipe to -8 fitting n the front. The manifold is set up with EFI bungs welded to the runners of the intake but they have never had the hole punched all the way thru. The plates that bolt to the cylinder head are made from .500" billet and the ports measure 2.375" tall by 1.70" wide. The manifold has water provisions in the front which are - 10 and in the rear there are two -6 fittings. The front of the manifold has a backfire valve but someone has removed the springs and locked it down with the bolts. If the racer chooses they can reinstall the springs and there will be a backfire provision. The welds on the manifold are beautiful and with a few minutes of elbow grease this manifold will polish up to a brilliant luster. Manifold weights fifty pounds as seen in the pictures and is 9.50" tall from deck surface to blower mounting surface. For more pictures visit www.rbssuperchargers.com #7005-0005B $1,700.00. Have questions please call at 530 274-3835.