flow meter question

Discussion in 'PSI Superchargers Tech Questions' started by CjRedden, Jul 17, 2016.

  1. CjRedden

    CjRedden Member

    Joined:
    Jan 16, 2010
    Messages:
    153
    Likes Received:
    0
    how do you guys set up your flow meters? do you run 2 meters, one for the hat and one for the port? or do you run one line out of the barrel valve through the meter then put in a Y to the hat and the port? I would like to get into a flowmeter and learn how this system. any info would be greatly appreciated.
     
    #1
    CjRedden, Jul 17, 2016
  2. Sandracer695

    Sandracer695 Member

    Joined:
    Jan 8, 2005
    Messages:
    235
    Likes Received:
    4
    Barrel valve-flow meter-Y to hat and port nozzles. Great tuning tool.
     
    #2
    Sandracer695, Jul 17, 2016
  3. Jason Green

    Jason Green Member

    Joined:
    Feb 20, 2016
    Messages:
    97
    Likes Received:
    5
    ^^ what he said. i wouldn't run an injected car without it
     
    #3
    Jason Green, Jul 18, 2016
  4. CjRedden

    CjRedden Member

    Joined:
    Jan 16, 2010
    Messages:
    153
    Likes Received:
    0
    I am running a v300sd. I can get this flow meter i have in the picture. Will this work with the vnet cables? Should i cap off the port line of the BV and run the outlet of the hat to this meter then split it to the hat and the port?
     

    Attached Files:

    #4
    CjRedden, Jul 18, 2016
  5. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    To answer your question directly - When using a flow meter, you have to run everything going to the motor through the flow meter, so instead of using both outputs of the K valve, you typically use the top side and Y it off after the flow meter.
     
    #5
    Will Hanna, Jul 18, 2016
  6. Jason Green

    Jason Green Member

    Joined:
    Feb 20, 2016
    Messages:
    97
    Likes Received:
    5
    I would call racepak and talk to them about it. Do you know for sure that one was used with alcohol? You will still need the v net module for the flow meter and they will probably want to bench check it to make sure it's calibrated correctly.
     
    #6
    Jason Green, Jul 18, 2016
    ozrace likes this.
  7. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    If it is a Racepak flow meter then the calibration is hand scribed on the top of the flow meter. Not the one that is neatly typed. You have to enter that number into your Racepak after you do the VNet discovery. If you call me then I can explain that to you. If there is no ha scribed number then it has to go to Racepak for calibration to get that number
     
    #7
    Mike Canter, Jul 18, 2016
  8. CjRedden

    CjRedden Member

    Joined:
    Jan 16, 2010
    Messages:
    153
    Likes Received:
    0
    thank you Mike and guys. once I get the piece in my hands I will let you know. I will send you an email.
     
    #8
    CjRedden, Jul 18, 2016

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM