F3 procharger & Alchol

Discussion in 'PSI Superchargers Tech Questions' started by decline56, Aug 26, 2011.

  1. decline56

    decline56 New Member

    Joined:
    Sep 13, 2010
    Messages:
    1
    Likes Received:
    0
    Anybody running alcohol injection with an F3 procharger? have a buddy with a 540 and an F3, wants to run alcohol injection with it. looking at a Rons Terminator to blow through. Asked my help but since it is not a Roots with a hat not sure what I should tell him. Cannot seem to find much information in cyberland about this set-up. If anyone can help it would be appreciated
     
    #1
    decline56, Aug 26, 2011
  2. Andy C

    Andy C Member

    Joined:
    Mar 25, 2006
    Messages:
    229
    Likes Received:
    3
    F3

    We had a mechanical set up with F3...440 sbf it sucked... put a MFI system on it workes great... If i were you i would NOT go with mechanical set up.
     
    #2
    Andy C, Aug 27, 2011
  3. badbird

    badbird New Member

    Joined:
    Jun 16, 2008
    Messages:
    373
    Likes Received:
    1
    i know someone thats got the ex bo butner f3 smallblock from his 2006 nhra comp eliminator championship winning car
    that run on race gas its now on alky with a BS3 set up and 16 injectors

    as said forget mechanical, efi is so easy
     
    #3
    badbird, Aug 27, 2011
  4. TOL

    TOL Active Member

    Joined:
    May 18, 2005
    Messages:
    1,352
    Likes Received:
    18
    My two cents.....

    It would work with mechanical and a fuel back pressure pinch valve (Hilborn, Kinsler, Ron's, etc.), but it would work so much nicer with EFI. Big Stuff, or Motec, with Moran or Injector Dynamics injectors. I would use the ECU for spark control too, and find the baddest ice/liquid/air intercooler you can fit. You can run meth non-intercooled, but why give up the improved density and lower chamber temps?

    I have a good friend who runs single stage turbo (50psig), intercooling (ice/water/air), and meth at the ports near the head, with Injector Dynamics nozzles, and 12.5:1 static compression. His deal is as reliable as an anvil, and the oil does not get terribly milky after a run.

    These guys have a bunch of experience with meth centrifugals. There are other guys out there too if you Google around and check out the boards. http://www.micksperformance.com/
     
    #4
    Last edited: Aug 27, 2011
    TOL, Aug 27, 2011
  5. z28a

    z28a Member

    Joined:
    Oct 7, 2009
    Messages:
    50
    Likes Received:
    0
    We have a F3 135 on oure 526 veney hemi, we use a MFI injection and it works perfect, wouldnt wanna change the MFI widh anything i seen yet.
     
    #5
    z28a, Aug 28, 2011
  6. pro mod steve

    pro mod steve New Member

    Joined:
    Aug 8, 2011
    Messages:
    8
    Likes Received:
    0
    Might give Steve Morris a call he seems prety knowledgable on this stuff.
     
    #6
    pro mod steve, Sep 2, 2011
  7. Ron C

    Ron C Jr. Dragster

    Joined:
    Mar 4, 2005
    Messages:
    519
    Likes Received:
    1
    Steve Morris is knowledgeable about any kind of induction system you want to run on your F3....or turbo.
    http://www.stevemorrisengines.com/

    Blessings................Ron Clevenger
     
    #7
    Ron C, Sep 2, 2011

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM