Enderle Nozzle Sizes

Discussion in 'PSI Superchargers Tech Questions' started by BEDNAR1320, May 11, 2016.

  1. BEDNAR1320

    BEDNAR1320 Member

    Joined:
    Oct 8, 2008
    Messages:
    323
    Likes Received:
    21
    I want to add two additional nozzles in the back of my blower. I currently run all 8 hat nozzles at 42, can I just make the four rear blower nozzles 21's and keep the same total area?

    In other words are two 21's equal to one 42?
     
    #1
    Last edited: May 11, 2016
    BEDNAR1320, May 11, 2016
  2. youngtuner

    youngtuner Member

    Joined:
    Mar 24, 2004
    Messages:
    956
    Likes Received:
    5
    If you want to keep the area close you need to put 29 or 30s in.
    If my charts are still correct a 41 flows .001321
    a 21 only flows .000346
    a 29 flows .000661
     
    #2
    youngtuner, May 11, 2016
  3. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Young tuner is correct that it is area you are concerned with and not diameter. I think a 21 or even a 29 is too small of a diameter and risks dirt blockage. If you are just trying to lubricate and cool the blower I would cut back the number of hat nozzles to four and put the four with 42 jets in the top of the blower
     
    #3
    Mike Canter, May 11, 2016
  4. TWD

    TWD Blown alky

    Joined:
    Jan 4, 2008
    Messages:
    99
    Likes Received:
    0
    #4
    TWD, May 12, 2016
  5. BEDNAR1320

    BEDNAR1320 Member

    Joined:
    Oct 8, 2008
    Messages:
    323
    Likes Received:
    21
    #5
    BEDNAR1320, May 12, 2016

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM