dragster dollie

Discussion in 'PSI Superchargers Tech Questions' started by drn1013rd, Jun 29, 2009.

  1. drn1013rd

    drn1013rd Member

    Joined:
    Aug 23, 2006
    Messages:
    186
    Likes Received:
    1
    anyone know where to look for specs on a dragster front end dollie my traileris too high even after ramps and raising front, the car still drags, i have made 2 buy guessing but just don't balance outs seen some the pros use but don't know if they bought them or made them.
    any help greatly appreciated thanks don
     
    #1
  2. GregM784

    GregM784 Member

    Joined:
    Aug 24, 2008
    Messages:
    915
    Likes Received:
    14
    I made mine. It is a 10" swivel caster, pnuematic tire, and it cradles the frame rails. The front tires are about 16" off the ground when on the caster. We either push it in the box, or let the winch do it. I do wrap a ratchet strap around it for safty. My next version will be the same height, but dual wheel. The nose weight maxes out my single caster.
     
    #2
  3. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    we copied mitch kings it uses 2 fold up trailer wheel dollies if you go to my web page and look at the pics there will be some iam sure of it is real simple
    www.myspace.com/davelowe
     
    #3
  4. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    #4

Share This Page