data logger

Has any of you dragers used or know about Edelbrock Data Loggers,any good?

 

it's not a racepak but we have been using one for years

no problems

also if you have an older one they have the sensors on sale for under $50 each, I just bought 3 as I have a used system that came with only a couple sensors

 

Data logger infomation

If you are running a blower set up I would stay away from the Edelbrook unit, it does not have the necessary shielding for this applacation, and you will get a lot of runs that will not record, that is way I took my unit out. also it was very hard to get to the correct person for tec support.
For the monay RPM Data logger is kick a$$, and will save you about 10K if you compare options with a racepac, and is cheaper then the Edelbrook unit.
Randy is one of the nices guys you will ever find to deal with, FYI I had a dead senser that went bad after a few races, he did not ask any questions he sent me a new senser and paid the ups both ways to get me a new one and get the old one back to him. I do not think you can get that kind of service from most of the other companies!! If you seach RPM data loggers on this web site you will see there are quite a few happy customers, and I am one. Randys # is 405 495 0454. or on the web at www.rpmperf.com.

good luck

Butch

 

we have a SBC with a 14-71 blower and have never had any problems with it recording. been about 5 years I guess

it is mounted inside behind a steel firewall and I use shielded cable around mag 44 connections

 

hey Ricky how did you sheild your wires..thanks Dave

 

Quick Data

Hi, have a Quick Data for seven years without any problems, KB 526, 14/71 HH Little. Mounted inside, passenger position.